lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 33/36] ARM: s3c: move low-level clk reg access into platform code
Date
Rather than have the cpufreq drivers touch include the
common headers to get the constants, add a small indirection.
This is still not the proper way that would do this through
the common clk API, but it lets us kill off the header file
usage.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/cpufreq-utils.c | 32 ++++++++++++++++++++
drivers/cpufreq/s3c2410-cpufreq.c | 8 +----
drivers/cpufreq/s3c2412-cpufreq.c | 10 ++----
drivers/cpufreq/s3c2440-cpufreq.c | 16 +++-------
drivers/cpufreq/s3c24xx-cpufreq.c | 11 ++-----
include/linux/soc/samsung/s3c-cpufreq-core.h | 7 +++++
7 files changed, 51 insertions(+), 35 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 695573df00b1..195a4cb23ecb 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -38,7 +38,7 @@ obj-$(CONFIG_PM_SLEEP) += irq-pm.o sleep.o

# common code

-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += cpufreq-utils.o

obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o
obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
index 43ab714eaa9e..75c197d59a75 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -60,3 +60,35 @@ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
if (!IS_ERR(cfg->mpll))
clk_set_rate(cfg->mpll, cfg->pll.frequency);
}
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+u32 s3c2440_read_camdivn()
+{
+ return __raw_readl(S3C2440_CAMDIVN);
+}
+
+void s3c2440_write_camdivn(u32 camdiv)
+{
+ __raw_writel(camdiv, S3C2440_CAMDIVN);
+}
+#endif
+
+u32 s3c24xx_read_clkdivn()
+{
+ return __raw_readl(S3C2410_CLKDIVN);
+}
+
+void s3c24xx_write_clkdivn(u32 clkdiv)
+{
+ __raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+u32 s3c24xx_read_mpllcon()
+{
+ return __raw_readl(S3C2410_MPLLCON);
+}
+
+void s3c24xx_write_locktime(u32 locktime)
+{
+ return __raw_writel(locktime, S3C2410_LOCKTIME);
+}
diff --git a/drivers/cpufreq/s3c2410-cpufreq.c b/drivers/cpufreq/s3c2410-cpufreq.c
index 9c2f29cacdd0..5dcfbf0bfb74 100644
--- a/drivers/cpufreq/s3c2410-cpufreq.c
+++ b/drivers/cpufreq/s3c2410-cpufreq.c
@@ -22,12 +22,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

-#include <mach/map.h>
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
-
#define S3C2410_CLKDIVN_PDIVN (1<<0)
#define S3C2410_CLKDIVN_HDIVN (1<<1)

@@ -43,7 +37,7 @@ static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
if (cfg->divs.p_divisor != cfg->divs.h_divisor)
clkdiv |= S3C2410_CLKDIVN_PDIVN;

- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);
}

static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index a77c63e92e1a..5945945ead7c 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -25,12 +25,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

-#include <mach/map.h>
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
-
#define S3C2412_CLKDIVN_PDIVN (1<<2)
#define S3C2412_CLKDIVN_HDIVN_MASK (3<<0)
#define S3C2412_CLKDIVN_ARMDIVN (1<<3)
@@ -132,7 +126,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
unsigned long clkdiv;
unsigned long olddiv;

- olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+ olddiv = clkdiv = s3c24xx_read_clkdivn();

/* clear off current clock info */

@@ -149,7 +143,7 @@ static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
clkdiv |= S3C2412_CLKDIVN_PDIVN;

s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c24xx_write_clkdivn(clkdiv);

clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 442abdccb9c1..148e8aedefa9 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -26,12 +26,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

-#include <mach/map.h>
-
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-#define S3C2410_CLKDIVN S3C2410_CLKREG(0x14)
-#define S3C2440_CAMDIVN S3C2410_CLKREG(0x18)
-
#define S3C2440_CLKDIVN_PDIVN (1<<0)
#define S3C2440_CLKDIVN_HDIVN_MASK (3<<1)
#define S3C2440_CLKDIVN_HDIVN_1 (0<<1)
@@ -162,8 +156,8 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
s3c_freq_dbg("%s: divisors: h=%d, p=%d\n", __func__,
cfg->divs.h_divisor, cfg->divs.p_divisor);

- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
+ clkdiv = s3c24xx_read_clkdivn();
+ camdiv = s3c2440_read_camdivn();

clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
camdiv &= ~CAMDIVN_HCLK_HALF;
@@ -203,11 +197,11 @@ static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
* then make a short delay and remove the hclk halving if necessary.
*/

- __raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
+ s3c2440_write_camdivn(camdiv | CAMDIVN_HCLK_HALF);
+ s3c24xx_write_clkdivn(clkdiv);

ndelay(20);
- __raw_writel(camdiv, S3C2440_CAMDIVN);
+ s3c2440_write_camdivn(camdiv);

clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
}
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 01b1823ea208..37efc0dc3f91 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -27,12 +27,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

-#include <mach/map.h>
-
/* note, cpufreq support deals in kHz, no Hz */
-#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
-#define S3C2410_MPLLCON S3C2410_CLKREG(0x04)
-
static struct cpufreq_driver s3c24xx_driver;
static struct s3c_cpufreq_config cpu_cur;
static struct s3c_iotimings s3c24xx_iotiming;
@@ -69,7 +64,7 @@ static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
cfg->freq.armclk = armclk = clk_get_rate(clk_arm);

- cfg->pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ cfg->pll.driver_data = s3c24xx_read_mpllcon();
cfg->pll.frequency = fclk;

cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
@@ -387,7 +382,7 @@ static unsigned int suspend_freq;
static int s3c_cpufreq_suspend(struct cpufreq_policy *policy)
{
suspend_pll.frequency = clk_get_rate(_clk_mpll);
- suspend_pll.driver_data = __raw_readl(S3C2410_MPLLCON);
+ suspend_pll.driver_data = s3c24xx_read_mpllcon();
suspend_freq = clk_get_rate(clk_arm);

return 0;
@@ -548,7 +543,7 @@ static void s3c_cpufreq_update_loctkime(void)
val |= calc_locktime(rate, cpu_cur.info->locktime_m);

pr_info("%s: new locktime is 0x%08x\n", __func__, val);
- __raw_writel(val, S3C2410_LOCKTIME);
+ s3c24xx_write_locktime(val);
}

static int s3c_cpufreq_build_freq(void)
diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h
index eca942559014..eaee883008a8 100644
--- a/include/linux/soc/samsung/s3c-cpufreq-core.h
+++ b/include/linux/soc/samsung/s3c-cpufreq-core.h
@@ -286,3 +286,10 @@ static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,

return index + 1;
}
+
+u32 s3c2440_read_camdivn(void);
+void s3c2440_write_camdivn(u32 camdiv);
+u32 s3c24xx_read_clkdivn(void);
+void s3c24xx_write_clkdivn(u32 clkdiv);
+u32 s3c24xx_read_mpllcon(void);
+void s3c24xx_write_locktime(u32 locktime);
--
2.20.0
\
 
 \ /
  Last update: 2019-10-10 22:57    [W:0.179 / U:8.712 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site