lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 22/36] ARM: s3c: leds: move setpull() calls into board files
Date
The leds-s3c24xx driver calls the private s3c_gpio_setpull()
interface for each gpio line, but doing this requires
access to the machine header files.

Move those calls into the machine init functions for any
board that uses the driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s3c24xx/common-smdk.c | 6 ++++--
arch/arm/mach-s3c24xx/mach-mini2440.c | 6 ++++++
arch/arm/mach-s3c24xx/mach-n30.c | 5 +++++
arch/arm/mach-s3c24xx/mach-qt2410.c | 1 +
arch/arm/mach-s3c24xx/mach-vr1000.c | 7 +++++++
drivers/leds/leds-s3c24xx.c | 7 -------
6 files changed, 23 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..5392d5106b4b 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -189,11 +189,13 @@ static const struct gpio smdk_led_gpios[] = {
void __init smdk_machine_init(void)
{
/* Configure the LEDs (even if we have no LED support)*/
+ int i, ret;

- int ret = gpio_request_array(smdk_led_gpios,
- ARRAY_SIZE(smdk_led_gpios));
+ ret = gpio_request_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
if (!WARN_ON(ret < 0))
gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
+ for (i = 0; i < ARRAY_SIZE(smdk_led_gpios); i++)
+ s3c_gpio_setpull(smdk_led_gpios[i].gpio, S3C_GPIO_PULL_NONE);

if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index bb44b8704d64..894d43ff94f1 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -690,6 +690,12 @@ static void __init mini2440_init(void)
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);

+ /* LEDs: no point in having a pull-up if we are always driving */
+ s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+
if (features.lcd_index != -1) {
int li;

diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 1836f1cc0992..5f5ca4b7015c 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -571,6 +571,11 @@ static void __init n30_init(void)
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);

+ /* LEDs: no point in having a pull-up if we are always driving */
+ s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 3cf8423c76c6..6686f02a3f4f 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -332,6 +332,7 @@ static void __init qt2410_machine_init(void)

/* set initial state of the LED GPIO */
WARN_ON(gpio_request_one(S3C2410_GPB(0), GPIOF_OUT_INIT_HIGH, NULL));
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
gpio_free(S3C2410_GPB(0));

s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 853e74f9b8b5..ca2f874a637e 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -37,6 +37,7 @@
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
+#include <plat/gpio-cfg.h>

#include <plat/cpu.h>
#include <plat/devs.h>
@@ -322,6 +323,12 @@ static void __init vr1000_init(void)
i2c_register_board_info(0, vr1000_i2c_devs,
ARRAY_SIZE(vr1000_i2c_devs));

+
+ /* LEDs: no point in having a pull-up if we are always driving */
+ s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+ s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+
nor_simtec_init();
simtec_audio_add(NULL, true, NULL);

diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index f8b8d6e313ee..bc67e5d344a6 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -16,9 +16,6 @@
#include <linux/module.h>
#include <linux/platform_data/leds-s3c24xx.h>

-#include <mach/regs-gpio.h>
-#include <plat/gpio-cfg.h>
-
/* our context */

struct s3c24xx_gpio_led {
@@ -73,10 +70,6 @@ static int s3c24xx_led_probe(struct platform_device *dev)
if (ret < 0)
return ret;

- /* no point in having a pull-up if we are always driving */
-
- s3c_gpio_setpull(pdata->gpio, S3C_GPIO_PULL_NONE);
-
if (pdata->flags & S3C24XX_LEDF_TRISTATE)
gpio_direction_input(pdata->gpio);
else
--
2.20.0
\
 
 \ /
  Last update: 2019-10-10 22:49    [W:0.202 / U:9.376 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site