lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/36] ARM: samsung: move pm check code to drivers/soc
Date
This is the only part of plat-samsung that is really
shared between the s3c and s5p ports. Moving it to
drivers/soc/ lets us make them completely independent.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/plat-samsung/Kconfig | 49 +----------
arch/arm/plat-samsung/Makefile | 2 -
.../arm/plat-samsung/include/plat/pm-common.h | 70 +---------------
drivers/soc/samsung/Kconfig | 48 ++++++++++-
drivers/soc/samsung/Makefile | 3 +
.../soc/samsung/s3c-pm-check.c | 2 +-
.../soc/samsung/s3c-pm-debug.c | 3 +-
include/linux/soc/samsung/s3c-pm.h | 84 +++++++++++++++++++
9 files changed, 139 insertions(+), 123 deletions(-)
rename arch/arm/plat-samsung/pm-check.c => drivers/soc/samsung/s3c-pm-check.c (99%)
rename arch/arm/plat-samsung/pm-debug.c => drivers/soc/samsung/s3c-pm-debug.c (97%)
create mode 100644 include/linux/soc/samsung/s3c-pm.h

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 03984a791879..d2b0e64bad7e 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -18,6 +18,7 @@ config ARCH_S5PV210
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
+ select SOC_SAMSUNG
help
Samsung S5PV210/S5PC110 series based systems

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index e31a156a27df..740bdb23f38a 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -8,6 +8,7 @@ config PLAT_SAMSUNG
default y
select GENERIC_IRQ_CHIP
select NO_IOPORT_MAP
+ select SOC_SAMSUNG
help
Base platform code for all Samsung SoC based systems

@@ -234,54 +235,6 @@ config SAMSUNG_PM_GPIO
pinctrl-samsung driver.
endif

-comment "Power management"
-
-config SAMSUNG_PM_DEBUG
- bool "Samsung PM Suspend debug"
- depends on PM && DEBUG_KERNEL
- depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
- depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
- for more information.
-
-config S3C_PM_DEBUG_LED_SMDK
- bool "SMDK LED suspend/resume debugging"
- depends on PM && (MACH_SMDK6410)
- help
- Say Y here to enable the use of the SMDK LEDs on the baseboard
- for debugging of the state of the suspend and resume process.
-
- Note, this currently only works for S3C64XX based SMDK boards.
-
-config SAMSUNG_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
- select CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
- Note, this can take several seconds depending on memory size
- and CPU speed.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
-config SAMSUNG_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on PM && SAMSUNG_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but will identify any
- faults with better precision.
-
- See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
-
config SAMSUNG_WAKEMASK
bool
depends on PM
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3db9d2c38258..d88b9b84f3a9 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -28,8 +28,6 @@ obj-$(CONFIG_PM_SLEEP) += pm-common.o
obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
-obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
-obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o

obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o
diff --git a/arch/arm/plat-samsung/include/plat/pm-common.h b/arch/arm/plat-samsung/include/plat/pm-common.h
index 87fa97fd6e8b..18b9607e1e39 100644
--- a/arch/arm/plat-samsung/include/plat/pm-common.h
+++ b/arch/arm/plat-samsung/include/plat/pm-common.h
@@ -11,6 +11,7 @@
#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__

#include <linux/irq.h>
+#include <linux/soc/samsung/s3c-pm.h>

/* sleep save info */

@@ -36,73 +37,4 @@ extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);

-/* PM debug functions */
-
-/**
- * struct pm_uart_save - save block for core UART
- * @ulcon: Save value for S3C2410_ULCON
- * @ucon: Save value for S3C2410_UCON
- * @ufcon: Save value for S3C2410_UFCON
- * @umcon: Save value for S3C2410_UMCON
- * @ubrdiv: Save value for S3C2410_UBRDIV
- *
- * Save block for UART registers to be held over sleep and restored if they
- * are needed (say by debug).
-*/
-struct pm_uart_save {
- u32 ulcon;
- u32 ucon;
- u32 ufcon;
- u32 umcon;
- u32 ubrdiv;
- u32 udivslot;
-};
-
-#ifdef CONFIG_SAMSUNG_PM_DEBUG
-/**
- * s3c_pm_dbg() - low level debug function for use in suspend/resume.
- * @msg: The message to print.
- *
- * This function is used mainly to debug the resume process before the system
- * can rely on printk/console output. It uses the low-level debugging output
- * routine printascii() to do its work.
- */
-extern void s3c_pm_dbg(const char *msg, ...);
-
-#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
-
-extern void s3c_pm_save_uarts(bool is_s3c24xx);
-extern void s3c_pm_restore_uarts(bool is_s3c24xx);
-
-#ifdef CONFIG_ARCH_S3C64XX
-extern void s3c_pm_arch_update_uart(void __iomem *regs,
- struct pm_uart_save *save);
-#else
-static inline void
-s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
-{
-}
-#endif
-
-#else
-#define S3C_PMDBG(fmt...) pr_debug(fmt)
-
-static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
-static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
-#endif
-
-/* suspend memory checking */
-
-#ifdef CONFIG_SAMSUNG_PM_CHECK
-extern void s3c_pm_check_prepare(void);
-extern void s3c_pm_check_restore(void);
-extern void s3c_pm_check_cleanup(void);
-extern void s3c_pm_check_store(void);
-#else
-#define s3c_pm_check_prepare() do { } while (0)
-#define s3c_pm_check_restore() do { } while (0)
-#define s3c_pm_check_cleanup() do { } while (0)
-#define s3c_pm_check_store() do { } while (0)
-#endif
-
#endif
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 33ad0de2de3c..0ea7402ffba3 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -25,6 +25,52 @@ config EXYNOS_PMU_ARM_DRIVERS

config EXYNOS_PM_DOMAINS
bool "Exynos PM domains" if COMPILE_TEST
- depends on PM_GENERIC_DOMAINS || COMPILE_TEST
+ depends on (ARCH_EXYNOS && PM_GENERIC_DOMAINS) || COMPILE_TEST
+
+config SAMSUNG_PM_DEBUG
+ bool "Samsung PM Suspend debug"
+ depends on PM && DEBUG_KERNEL
+ depends on PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
+ depends on DEBUG_S3C24XX_UART || DEBUG_S3C2410_UART
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+ for more information.
+
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
+config SAMSUNG_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
+ select CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+ Note, this can take several seconds depending on memory size
+ and CPU speed.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>
+
+config SAMSUNG_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on PM && SAMSUNG_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but will identify any
+ faults with better precision.
+
+ See <file:Documentation/arm/samsung-s3c24xx/suspend.rst>

endif
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 3b6a8797416c..88ae7a522055 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -6,3 +6,6 @@ obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o
obj-$(CONFIG_EXYNOS_PMU_ARM_DRIVERS) += exynos3250-pmu.o exynos4-pmu.o \
exynos5250-pmu.o exynos5420-pmu.o
obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o
+
+obj-$(CONFIG_SAMSUNG_PM_CHECK) += s3c-pm-check.o
+obj-$(CONFIG_SAMSUNG_PM_DEBUG) += s3c-pm-debug.o
diff --git a/arch/arm/plat-samsung/pm-check.c b/drivers/soc/samsung/s3c-pm-check.c
similarity index 99%
rename from arch/arm/plat-samsung/pm-check.c
rename to drivers/soc/samsung/s3c-pm-check.c
index cd2c02c68bc3..ff3e099fc208 100644
--- a/arch/arm/plat-samsung/pm-check.c
+++ b/drivers/soc/samsung/s3c-pm-check.c
@@ -15,7 +15,7 @@
#include <linux/ioport.h>
#include <linux/slab.h>

-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>

#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value
diff --git a/arch/arm/plat-samsung/pm-debug.c b/drivers/soc/samsung/s3c-pm-debug.c
similarity index 97%
rename from arch/arm/plat-samsung/pm-debug.c
rename to drivers/soc/samsung/s3c-pm-debug.c
index 482d53753e93..b5ce0e9a41e5 100644
--- a/arch/arm/plat-samsung/pm-debug.c
+++ b/drivers/soc/samsung/s3c-pm-debug.c
@@ -15,8 +15,7 @@

#include <asm/mach/map.h>

-#include <plat/cpu.h>
-#include <plat/pm-common.h>
+#include <linux/soc/samsung/s3c-pm.h>

static struct pm_uart_save uart_save;

diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h
new file mode 100644
index 000000000000..d477b314d034
--- /dev/null
+++ b/include/linux/soc/samsung/s3c-pm.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ * Tomasz Figa <t.figa@samsung.com>
+ * Copyright (c) 2004 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Written by Ben Dooks, <ben@simtec.co.uk>
+ */
+
+#ifndef __SAMSUNG_SOC_S3C_PM_H
+#define __SAMSUNG_SOC_S3C_PM_H __FILE__
+
+#include <linux/types.h>
+
+/* PM debug functions */
+
+/**
+ * struct pm_uart_save - save block for core UART
+ * @ulcon: Save value for S3C2410_ULCON
+ * @ucon: Save value for S3C2410_UCON
+ * @ufcon: Save value for S3C2410_UFCON
+ * @umcon: Save value for S3C2410_UMCON
+ * @ubrdiv: Save value for S3C2410_UBRDIV
+ *
+ * Save block for UART registers to be held over sleep and restored if they
+ * are needed (say by debug).
+*/
+struct pm_uart_save {
+ u32 ulcon;
+ u32 ucon;
+ u32 ufcon;
+ u32 umcon;
+ u32 ubrdiv;
+ u32 udivslot;
+};
+
+#ifdef CONFIG_SAMSUNG_PM_DEBUG
+/**
+ * s3c_pm_dbg() - low level debug function for use in suspend/resume.
+ * @msg: The message to print.
+ *
+ * This function is used mainly to debug the resume process before the system
+ * can rely on printk/console output. It uses the low-level debugging output
+ * routine printascii() to do its work.
+ */
+extern void s3c_pm_dbg(const char *msg, ...);
+
+#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
+
+extern void s3c_pm_save_uarts(bool is_s3c24xx);
+extern void s3c_pm_restore_uarts(bool is_s3c24xx);
+
+#ifdef CONFIG_ARCH_S3C64XX
+extern void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save);
+#else
+static inline void
+s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save)
+{
+}
+#endif
+
+#else
+#define S3C_PMDBG(fmt...) pr_debug(fmt)
+
+static inline void s3c_pm_save_uarts(bool is_s3c24xx) { }
+static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { }
+#endif
+
+/* suspend memory checking */
+
+#ifdef CONFIG_SAMSUNG_PM_CHECK
+extern void s3c_pm_check_prepare(void);
+extern void s3c_pm_check_restore(void);
+extern void s3c_pm_check_cleanup(void);
+extern void s3c_pm_check_store(void);
+#else
+#define s3c_pm_check_prepare() do { } while (0)
+#define s3c_pm_check_restore() do { } while (0)
+#define s3c_pm_check_cleanup() do { } while (0)
+#define s3c_pm_check_store() do { } while (0)
+#endif
+
+#endif
--
2.20.0
\
 
 \ /
  Last update: 2019-10-10 22:36    [W:0.151 / U:18.312 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site