lkml.org 
[lkml]   [2019]   [Oct]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] clk: meson: axg-audio: add sm1 support
Date
The purpose of this patchset is to add the sm1 support to the amlogic audio
clock controller. The line count is lot higher than what I hoped for. Even
if extremely similar, there is a shift in the register address on the sm1
which makes a bit of a mess.

I could have patched the address on the fly if running on sm1 but the end
result did not save much lines and would have been a pain to maintain and
scale in the future

Instead I choose to re-arrange the driver to share the macros and declare
separate clocks for the clock which have changed.

Change since v1 [0]:
- Fix newline in the last patch

[0]: https://lkml.kernel.org/r/20190924153356.24103-1-jbrunet@baylibre.com

Jerome Brunet (7):
dt-bindings: clk: axg-audio: add sm1 bindings
dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
clk: meson: axg-audio: remove useless defines
clk: meson: axg-audio: fix regmap last register
clk: meson: axg-audio: prepare sm1 addition
clk: meson: axg-audio: provide clk top signal name
clk: meson: axg_audio: add sm1 support

.../bindings/clock/amlogic,axg-audio-clkc.txt | 3 +-
drivers/clk/meson/axg-audio.c | 2021 +++++++++++------
drivers/clk/meson/axg-audio.h | 21 +-
include/dt-bindings/clock/axg-audio-clkc.h | 10 +
.../reset/amlogic,meson-g12a-audio-reset.h | 15 +
5 files changed, 1373 insertions(+), 697 deletions(-)

--
2.21.0

\
 
 \ /
  Last update: 2019-10-01 13:57    [W:0.100 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site