lkml.org 
[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/4] drm/vc4: Wait for display list synchronization when completing commit
On Wed, Jan 09, 2019 at 05:52:20PM +0100, Paul Kocialkowski wrote:
> Hi Daniel,
>
> On Tue, 2019-01-08 at 19:21 +0100, Daniel Vetter wrote:
> > On Tue, Jan 8, 2019 at 3:51 PM Paul Kocialkowski
> > <paul.kocialkowski@bootlin.com> wrote:
> > > During an atomic commit, the HVS is configured with a display list
> > > for the channel matching the associated CRTC. The Pixel Valve (CRTC)
> > > and encoder are also configured for the new setup at that time.
> > > While the Pixel Valve and encoder are reconfigured synchronously, the
> > > HVS is only reconfigured after the display list address (DISPLIST) has
> > > been updated to the current display list address (DISPLACTX), which is
> > > the responsibility of the hardware.
> > >
> > > The time frame during which the HVS is still running on its previous
> > > configuration but the CRTC and encoder have been reconfigured already
> > > can lead to a number of synchronization issues. They will eventually
> > > cause errors reported on the FIFOs, such as underruns.
> > >
> > > With underrun detection enabled (from Boris Brezillon's series), this
> > > leads to unreliable underrun detection with random false positives.
> > >
> > > To ensure a coherent state, wait for each enabled channel of the HVS
> > > to synchronize its current display list address. This fixes the issue
> > > of random underrun reporting on commits.
> > >
> > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > > ---
> > > drivers/gpu/drm/vc4/vc4_drv.h | 1 +
> > > drivers/gpu/drm/vc4/vc4_hvs.c | 17 +++++++++++++++++
> > > drivers/gpu/drm/vc4/vc4_kms.c | 2 ++
> > > drivers/gpu/drm/vc4/vc4_regs.h | 2 ++
> > > 4 files changed, 22 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
> > > index c24b078f0593..955f157f5ad0 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_drv.h
> > > +++ b/drivers/gpu/drm/vc4/vc4_drv.h
> > > @@ -772,6 +772,7 @@ void vc4_irq_reset(struct drm_device *dev);
> > > extern struct platform_driver vc4_hvs_driver;
> > > void vc4_hvs_dump_state(struct drm_device *dev);
> > > int vc4_hvs_debugfs_regs(struct seq_file *m, void *unused);
> > > +void vc4_hvs_sync_dlist(struct drm_device *dev);
> > >
> > > /* vc4_kms.c */
> > > int vc4_kms_load(struct drm_device *dev);
> > > diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
> > > index 5d8c749c9749..1ba60b8e0c2d 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_hvs.c
> > > +++ b/drivers/gpu/drm/vc4/vc4_hvs.c
> > > @@ -166,6 +166,23 @@ static int vc4_hvs_upload_linear_kernel(struct vc4_hvs *hvs,
> > > return 0;
> > > }
> > >
> > > +void vc4_hvs_sync_dlist(struct drm_device *dev)
> > > +{
> > > + struct vc4_dev *vc4 = to_vc4_dev(dev);
> > > + unsigned int i;
> > > + int ret;
> > > +
> > > + for (i = 0; i < SCALER_CHANNELS_COUNT; i++) {
> > > + if (!(HVS_READ(SCALER_DISPCTRLX(i)) & SCALER_DISPCTRLX_ENABLE))
> > > + continue;
> > > +
> > > + ret = wait_for(HVS_READ(SCALER_DISPLACTX(i)) ==
> > > + HVS_READ(SCALER_DISPLISTX(i)), 1000);
> > > + WARN(ret, "Timeout waiting for channel %d display list sync\n",
> > > + i);
> > > + }
> > > +}
> > > +
> > > static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
> > > {
> > > struct platform_device *pdev = to_platform_device(dev);
> > > diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
> > > index 0490edb192a1..2d66a2b57a91 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_kms.c
> > > +++ b/drivers/gpu/drm/vc4/vc4_kms.c
> > > @@ -155,6 +155,8 @@ vc4_atomic_complete_commit(struct drm_atomic_state *state)
> > >
> > > drm_atomic_helper_commit_hw_done(state);
> > >
> > > + vc4_hvs_sync_dlist(dev);
> >
> > From your description I'd have guessed you want this between when you
> > update the planes and the crtc, so somewhere between commit_planes()
> > and commit_modeset_enables(). At least I have no idea how waiting here
> > can prevent underruns, by this point there's no further hw programming
> > happening.
>
> One thing that I did not mention is that the display list (that
> configures the planes) is only set at crtc_enable time (and taken into
> account by the hardware later).
>
> However, even calling vc4_hvs_sync_dlist right at the end of
> crtc_enable doesn't do either (the old display list just sticks). It
> only seems to work after the HDMI encoder enable step and I don't know
> any good reason why.
>
> I didn't find any description of when that dlist sync mechanism is
> supposed to take place and what particular event triggers it. Perhaps
> it is triggered by a signal originating from the encoder? If anyone has
> insight on the hardware, feel free to shed some light here :)

Maybe my concern wasn't clear: I have no idea why you need this exactly
and how your hw works. Only thing I meant to highlight is that since all
you're doing is wait a bit, then the only reason I can come up with why
that wait does anything is cleanup_planes() later on. And if that's the
case, then you also need to sufficiently delay the flip_done signalling to
userspace (i.e. sending out the crtc_state->event vblank event).

But I'm really not understanding what the hw does and how your patch here
helps at all. It just looked really strange from a atomic kms pov.
-Daniel

>
> Cheers and thanks for the review,
>
> Paul
>
> > Only exception is if you have an IOMMU which can fault, in
> > which case the cleanup_planes might remove the buffers prematurely.
> > But if that's the problem, then your semantics of the flip_done event
> > are wrong - when flip_done is signalled, the hw must have stopped
> > scanning out the old planes, since userspace expects to be able to
> > start overwriting/reusing them.
> > -Daniel
> >
> > > +
> > > drm_atomic_helper_wait_for_flip_done(dev, state);
> > >
> > > drm_atomic_helper_cleanup_planes(dev, state);
> > > diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
> > > index 931088014272..50c653309aec 100644
> > > --- a/drivers/gpu/drm/vc4/vc4_regs.h
> > > +++ b/drivers/gpu/drm/vc4/vc4_regs.h
> > > @@ -212,6 +212,8 @@
> > >
> > > #define PV_HACT_ACT 0x30
> > >
> > > +#define SCALER_CHANNELS_COUNT 3
> > > +
> > > #define SCALER_DISPCTRL 0x00000000
> > > /* Global register for clock gating the HVS */
> > > # define SCALER_DISPCTRL_ENABLE BIT(31)
> > > --
> > > 2.20.1
> > >
> >
> >
> --
> Paul Kocialkowski, Bootlin
> Embedded Linux and kernel engineering
> https://bootlin.com
>

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2019-01-09 21:34    [W:0.072 / U:1.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site