lkml.org 
[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 0/9] Add power domain driver for corners on msm8996/sdm845
From
Date
Sorry, sent the v10 out by mistake instead of v11, please ignore.

On 1/10/2019 9:28 AM, Rajendra Nayak wrote:
> Changes in v10:
> * Updated level bindings to include opp-level as an
> optional property using operating-points-v2, no new
> compatible for the OPP table
> * Updated the dev_pm_opp_get_level() helper as per
> suggestions from Viresh
>
> Changes in v9:
> * Updated qcom-opp bindings to be generic and usable across other SoCs
> with similar needs (Like MediaTek)
> * Removed the simple_opp_to_performance_state() helper and added a
> dev_pm_opp_of_get_level() helper instead
> * Rebased on 5.0-rc1
>
> Changes in v8:
> * Patch 01/10: Bindings updated to mention opp-hz is optional
> * Patch 02/10: Fixed #power-domain-cells
> * All dependencies for 'Patch 10/10' are on their way to 4.21 via the pm tree
>
> Changes in v7:
> * Rebased on Andy's for-next, and used the updated cmd_db_read_aux_data()
> * Other minor fixes, all in 'PATCH 06/10' as suggested by Stephen
>
> Changes in v6:
> * OPP binding updates for qcom,level reviewed by Rob
> * DT bindings for rpmpd and rpmhpd updated to specify the
> OPP tables as child nodes of the power-controller itself
> * Removed some module specific remains from the drivers,
> now that they can only be built-in
> * Added a simple_opp_to_performance_state() helper
>
> Changes in v5:
> * First 6 patches are unchanged
> * Patch 7/8 adds the DT node for rpmh power-controller on sdm845 and the
> corresponding OPP tables for it to describe the performance states
> * Patch 8/8 adds a parent/child relationship across mx/cx and mx_ao/cx_ao
> as needed on sdm845 platform. This patch is dependent on the series from
> Viresh [1] which adds support to propogate performance states across the
> power domain hierarchy which is still being reviewed
>
> Changes in v4:
> * Included the patch to add qcom-opp bindings (dropped accidentally in v3)
> * merged the patches to add bindings for rpm and rpmh, added consumer binding example
> * Made the drivers built in, removed .remove
> * Added better description in changelog for PATCH 6/6
> * Updated rpmhpd_aggregate_corner() based on Davids feedback
> * rpmhpd_set_performance_state() returns max corner, in cases where its called
> with an INT_MAX
> * Dropped the patch to max vote on all corners at init, the patch did not
> work anyway, and it shouldn't be needed now
>
> Changes in v3:
> * Bindings split into seperate patches
> * Bindings updated to remove duplicate OPP table phandles
> * DT headers defining macros for Power domain indexes and OPP levels
> * Optimisations to use rpmh_write_async() whereever applicable
> * Fixed up handling of ACTIVE_ONLY/WAKE_ONLY/SLEEP voting for RPMh
> * Fixed the vlvl to hlvl conversions in set_performance
> * Other minor fixes based on review of v2
> * TODO: This series does not handle the case where all VDD_MX votes
> should be higher than VDD_CX from APPs, as pointed out
> by David Collins in v2. This needs support at genpd to propogate performance
> state up the parents, if we model these as Parent/Child to handle the
> interdependency.
>
> Changes in v2:
> * added a power domain driver for sdm845 which supports communicating to RPMh
> * dropped the changes to sdhc driver to move over to using OPP
> as there is active discussion on using OPP as the interface vs
> handling all of it in clock drivers
> * Other minor binding updates based on review of v1
>
> With performance state support for genpd/OPP merged, this is an effort
> to model a power domain driver to communicate corner/level
> values for qualcomm platforms to RPM (Remote Power Manager) and RPMh.
>
> [1] https://lkml.org/lkml/2018/11/26/333
>
> Rajendra Nayak (9):
> dt-bindings: opp: Introduce opp-level bindings
> OPP: Add support for parsing the 'opp-level' property
> dt-bindings: power: Add qcom rpm power domain driver bindings
> soc: qcom: rpmpd: Add a Power domain driver to model corners
> soc: qcom: rpmpd: Add support for get/set performance state
> arm64: dts: msm8996: Add rpmpd device node
> soc: qcom: rpmhpd: Add RPMh power domain driver
> arm64: dts: sdm845: Add rpmh powercontroller node
> soc: qcom: rpmhpd: Mark mx as a parent for cx
>
> Documentation/devicetree/bindings/opp/opp.txt | 5 +
> .../devicetree/bindings/power/qcom,rpmpd.txt | 145 +++++++
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 34 ++
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 51 +++
> drivers/opp/core.c | 18 +
> drivers/opp/of.c | 5 +-
> drivers/opp/opp.h | 2 +
> drivers/soc/qcom/Kconfig | 18 +
> drivers/soc/qcom/Makefile | 2 +
> drivers/soc/qcom/rpmhpd.c | 402 ++++++++++++++++++
> drivers/soc/qcom/rpmpd.c | 317 ++++++++++++++
> include/dt-bindings/power/qcom-rpmpd.h | 39 ++
> include/linux/pm_opp.h | 7 +
> 13 files changed, 1044 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/power/qcom,rpmpd.txt
> create mode 100644 drivers/soc/qcom/rpmhpd.c
> create mode 100644 drivers/soc/qcom/rpmpd.c
> create mode 100644 include/dt-bindings/power/qcom-rpmpd.h
>

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2019-01-10 05:01    [W:0.050 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site