lkml.org 
[lkml]   [2019]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: Regression in v5.0-rc1 with autosuspend hrtimers
On Tue, 8 Jan 2019 at 16:53, Tony Lindgren <tony@atomide.com> wrote:
>
> * Vincent Guittot <vincent.guittot@linaro.org> [190108 08:00]:
> > Hi Tony,
> >
> > On Tue, 8 Jan 2019 at 00:38, Tony Lindgren <tony@atomide.com> wrote:
> > >
> > > Hi all,
> > >
> > > Looks like commit 8234f6734c5d ("PM-runtime: Switch autosuspend
> > > over to using hrtimers") caused a regression on at least
> > > omap5-uevm where 8250 UART rx wake no longer works. I have not
> > > noticed this happening on others so far.
> > >
> > > The devices I've tested all are using 8250 with dedicated
> > > wakeirqs configured for the rx pin. I can see the interrupt
> > > increase on omap5-uevm after some one or more keypresses,
> > > but then nothing. It seems that the uart just falls back
> > > asleep right away or something.
> > >
> > > Any ideas what might be going wrong?
> >
> > What is the autosuspend value ? Can it be that the autosuspend is set
> > to a short value but was finally greater than 10-20ms on arm32. And
> > now the autosuspend happens before and this has changed the sequence ?
>
> It's set to 3 seconds. The difference between let's say
> C-A9 pandaboard (that is working) compared to C-A15 omap5-uevm
> is that the C-A15 has arch_timer in use. Other than that things
> should behave more or less the same way.
>
> Hmm so could it be that we now rely on timers that that may
> not be capable of waking up the system from idle states with
> hrtimer?

With nohz and hrtimer enabled, timer relies on hrtimer to generate
the tick so you should use the same interrupt.

>
> Regards,
>
> Tony
>

\
 
 \ /
  Last update: 2019-01-08 17:43    [from the cache]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and my Meterkast|Read the blog