lkml.org 
[lkml]   [2019]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] dt: bindings: lp5024: Introduce the lp5024 and lp5018 RGB driver
From
Date
Jacek

On 1/8/19 2:33 PM, Jacek Anaszewski wrote:
> Dan,
>
> On 12/19/18 5:26 PM, Dan Murphy wrote:
>> Introduce the bindings for the Texas Instruments LP5024 and the LP5018
>> RGB LED device driver.  The LP5024/18 can control RGB LEDs individually
>> or as part of a control bank group.  These devices have the ability
>> to adjust the mixing control for the RGB LEDs to obtain different colors
>> independent of the overall brightness of the LED grouping.
>>
>> Datasheet:
>> http://www.ti.com/lit/ds/symlink/lp5024.pdf
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>   .../devicetree/bindings/leds/leds-lp5024.txt  | 63 +++++++++++++++++++
>>   1 file changed, 63 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/leds/leds-lp5024.txt
>>
>> diff --git a/Documentation/devicetree/bindings/leds/leds-lp5024.txt b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
>> new file mode 100644
>> index 000000000000..9567aa6f7813
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/leds/leds-lp5024.txt
>> @@ -0,0 +1,63 @@
>> +* Texas Instruments - LP5024/18 RGB LED driver
>> +
>> +The LM3692x is an ultra-compact, highly efficient,
>> +white-LED driver designed for LCD display backlighting.
>> +
>> +The main difference between the LP5024 and L5018 is the number of
>> +RGB LEDs they support.  The LP5024 supports twenty four strings while the
>> +LP5018 supports eighteen strings.
>> +
>> +Required properties:
>> +    - compatible:
>> +        "ti,lp5018"
>> +        "ti,lp5024"
>> +    - reg :  I2C slave address
>> +    - #address-cells : 1
>> +    - #size-cells : 0
>> +
>> +Optional properties:
>> +    - enable-gpios : gpio pin to enable/disable the device.
>> +    - vled-supply : LED supply
>> +
>> +Required child properties:
>> +    - reg : Is the child node iteration.
>> +    - led-sources : LP5024 - 0 - 7
>> +            LP5018 - 0 - 5
>> +            Declares the LED string or strings that the child node
>> +            will control.  If ti,control-bank is set then this
>> +            property will contain multiple LED IDs.
>> +
>> +Optional child properties:
>> +    - label : see Documentation/devicetree/bindings/leds/common.txt
>> +    - linux,default-trigger :
>> +       see Documentation/devicetree/bindings/leds/common.txt
>> +    - ti,control-bank : Indicates that the LED strings declared in the
>> +                led-sources property are grouped within a control
>> +                bank for brightness and mixing control.
>> +
>> +Example:
>> +
>> +led-controller@28 {
>> +    compatible = "ti,lp5024";
>> +    reg = <0x28>;
>> +    #address-cells = <1>;
>> +    #size-cells = <0>;
>> +
>> +    enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
>> +    vled-supply = <&vbatt>;
>> +
>> +    led@0 {
>> +        reg = <0>;
>> +        led-sources = <1>;
>> +    };
>> +
>> +    led@1 {
>> +        reg = <1>;
>> +        led-sources = <0 6>;
>> +        ti,control-bank;
>
> Do you really need ti,control-bank? Doesn't led-sources array size
> greater than 1 mean that the node describes control bank?
>

That will work too.

> Also, does it make sense to have only two LEDs in the bank?

The array can populate all 7 LEDs in a single node. I only show 2 here as the example.
See the description above of the led-sources


Dan

>
>> +    };
>> +
>> +}
>> +
>> +For more product information please see the link below:
>> +http://www.ti.com/lit/ds/symlink/lp5024.pdf
>>
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-01-08 21:55    [W:0.150 / U:0.268 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site