lkml.org 
[lkml]   [2019]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/1] drm/prime: Use sg_dma_len() macro to get sg's length
On Mon, Jan 07, 2019 at 05:37:08PM +0530, Vivek Gautam wrote:
> After mapping a sg list the we should use sg_dma_address() and
> sg_dma_len() macros to access sg->address and sg->length. Fix
> the same for sg->length in drm_prime_sg_to_page_addr_arrays().
>
> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
> ---
>
> Changes since v1:
> - Fixed compilation error: replaced sg_dma_length() with sg_dma_len().
>
> This came while debugging one dmabuf import issue that we are seeing
> on sdm845 target.
> The dmabuf which is prepared by video (venus in this case), is imported
> by drm device.
> The import call flow looks like follows:
>
> drm_gem_prime_import()
> - drm_gem_prime_import_dev()
> - dma_buf_attach() & dma_buf_map_attachment()
> - From dma_buf_map_attachment()
> - vb2_dma_sg_dmabuf_ops_map()
> - dma_map_sg(): this updates the sg->nents.
>
> From debugging, the sg table mapping results in sg's 'nents' to be less that
> the original nents. Now drm device prepares the page information based on
> this sg table, and messes up with the mappings, and we start seeing random
> crashes as below from drm's memory space.
>
> Although this change isn't helping to fix the issue currently, but
> this fix seems the right thing to do.
>
> One thing to notice is that, if we restore the sg->nents to
> sg->orig_nents in vb2_dma_sg_dmabuf_ops_map(), we don't see the below
> corruptions.
>
> Any pointers on this will be highly appreciated.
> Thanks.
>
> ------
> [ 338.070558] Unable to handle kernel paging request at virtual address 0000400000000038
> [ 338.078751] Mem abort info:
> [ 338.081671] ESR = 0x96000004
> [ 338.084860] Exception class = DABT (current EL), IL = 32 bits
> [ 338.090972] SET = 0, FnV = 0
> [ 338.094139] EA = 0, S1PTW = 0
> [ 338.097393] Data abort info:
> [ 338.100375] ISV = 0, ISS = 0x00000004
> [ 338.104362] CM = 0, WnR = 0
> [ 338.107446] [0000400000000038] address between user and kernel address ranges
> [ 338.114801] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> [ 338.120527] Modules linked in: rfcomm uinput cdc_ether venus_dec venus_enc usbnet videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth r8152 mii ath10k_snoc venus_core ath10k_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath mac80211 ecdh_generic qcom_q6v5_mss lzo lzo_compress qcom_q6v5_adsp qcom_common qcom_q6v5 zram bridge stp llc ipt_MASQUERADE fuse snd_seq_dummy snd_seq snd_seq_device cfg80211 joydev
> [ 338.158192] CPU: 4 PID: 3235 Comm: chrome Tainted: G W 4.19.0 #2
> [ 338.165700] Hardware name: Google Cheza (rev1) (DT)
> [ 338.170720] pstate: 80400009 (Nzcv daif +PAN -UAO)
> [ 338.175660] pc : drm_mm_insert_node_in_range+0xfc/0x348
> [ 338.181035] lr : drm_mm_insert_node_in_range+0x24/0x348
> [ 338.186407] sp : ffffff8013033b30
> [ 338.189816] x29: ffffff8013033bd0 x28: ffffff8008591894
> [ 338.195275] x27: 0000000000000010 x26: 0000000000000000
> [ 338.200734] x25: 0000000000000000 x24: ffffffffffffffff
> [ 338.206194] x23: 0000000000000000 x22: ffffffc0f48b7e08
> [ 338.211656] x21: 0000000000000000 x20: 000000000000005d
> [ 338.217118] x19: 0000000000000000 x18: 0000000000000000
> [ 338.222581] x17: 0000000000000000 x16: 0000000000000000
> [ 338.228046] x15: 0000000000000000 x14: 0000000000000000
> [ 338.233511] x13: 0000000000000001 x12: ffffffc0b1da7200
> [ 338.238978] x11: 0000000000000010 x10: 0000000000000010
> [ 338.244437] x9 : 0000000000000008 x8 : 0000400000000000
> [ 338.249898] x7 : 0000000000000000 x6 : ffffffffffffffff
> [ 338.255361] x5 : 0000000000000000 x4 : 0000000000000000
> [ 338.260823] x3 : 0000000000000000 x2 : 000000000000005d
> [ 338.266285] x1 : ffffffc0b1da7100 x0 : ffffffc0b0215800
> [ 338.271748] Process chrome (pid: 3235, stack limit = 0x000000000900f416)
> [ 338.278628] Call trace:
> [ 338.281151] drm_mm_insert_node_in_range+0xfc/0x348
> [ 338.286168] msm_gem_map_vma+0x60/0xdc
> [ 338.290022] msm_gem_get_iova+0xb4/0xf4
> [ 338.293967] msm_ioctl_gem_info+0x90/0xdc
> [ 338.298089] drm_ioctl_kernel+0xa8/0xe8
> [ 338.302043] drm_ioctl+0x218/0x384
> [ 338.305547] drm_compat_ioctl+0xd8/0xe8
> [ 338.309503] __arm64_compat_sys_ioctl+0x134/0x20c
> [ 338.314339] el0_svc_common+0xa0/0xf0
> [ 338.318108] el0_svc_compat_handler+0x2c/0x38
> [ 338.322588] el0_svc_compat+0x8/0x18
> [ 338.326274] Code: f94066c8 aa1f03e0 321d03e9 321c03ea (f9401d0b)
> [ 338.332538] ---[ end trace 5c09e60869887d87 ]---
> [ 338.354633] Kernel panic - not syncing: Fatal exception
> [ 338.360018] SMP: stopping secondary CPUs
> [ 338.364179] Kernel Offset: disabled
> [ 338.367779] CPU features: 0x0,22802a18
> [ 338.371643] Memory Limit: none
> ------
>
> drivers/gpu/drm/drm_prime.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
> index 231e3f6d5f41..aa87ba9c0d7b 100644
> --- a/drivers/gpu/drm/drm_prime.c
> +++ b/drivers/gpu/drm/drm_prime.c
> @@ -945,7 +945,7 @@ int drm_prime_sg_to_page_addr_arrays(struct sg_table *sgt, struct page **pages,
>
> index = 0;
> for_each_sg(sgt->sgl, sg, sgt->nents, count) {

I thought Christoph is creating a new macro to iterator over the mapped
sg, which needs to be used here instead of for_each_sg (which is only
valid for iterating over the cpu side mapping/struct page).
-Daniel
> - len = sg->length;
> + len = sg_dma_len(sg);
> page = sg_page(sg);
> addr = sg_dma_address(sg);
>
> --
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2019-01-07 18:25    [W:0.050 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site