lkml.org 
[lkml]   [2019]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/6] media: sun6i: Add mod_rate quirk
On Mon, Dec 24, 2018 at 8:57 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Fri, Dec 21, 2018 at 6:30 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> >
> > On Thu, Dec 20, 2018 at 06:24:34PM +0530, Jagan Teki wrote:
> > > Unfortunately default CSI_SCLK rate cannot work properly to
> > > drive the connected sensor interface, particularly on few
> > > Allwinner SoC's like A64.
> > >
> > > So, add mod_rate quirk via driver data so-that the respective
> > > SoC's which require to alter the default mod clock rate can assign
> > > the operating clock rate.
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 34 +++++++++++++++----
> > > 1 file changed, 28 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > index ee882b66a5ea..fe002beae09c 100644
> > > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > @@ -15,6 +15,7 @@
> > > #include <linux/ioctl.h>
> > > #include <linux/module.h>
> > > #include <linux/of.h>
> > > +#include <linux/of_device.h>
> > > #include <linux/platform_device.h>
> > > #include <linux/pm_runtime.h>
> > > #include <linux/regmap.h>
> > > @@ -28,8 +29,13 @@
> > >
> > > #define MODULE_NAME "sun6i-csi"
> > >
> > > +struct sun6i_csi_variant {
> > > + unsigned long mod_rate;
> > > +};
> > > +
> > > struct sun6i_csi_dev {
> > > struct sun6i_csi csi;
> > > + const struct sun6i_csi_variant *variant;
> > > struct device *dev;
> > >
> > > struct regmap *regmap;
> > > @@ -822,33 +828,43 @@ static int sun6i_csi_resource_request(struct sun6i_csi_dev *sdev,
> > > return PTR_ERR(sdev->clk_mod);
> > > }
> > >
> > > + if (sdev->variant->mod_rate)
> > > + clk_set_rate_exclusive(sdev->clk_mod, sdev->variant->mod_rate);
> > > +
> >
> > It still doesn't make any sense to do it in the probe function...
>
> I'm not sure we discussed about the context wrt probe, we discussed
> about exclusive put clock. Since clocks were enabling in set_power and
> clock rate can be set during probe in single time instead of setting
> it in set_power for every power enablement. anything wrong with that.
>
> >
> > We discussed this in the previous iteration already.
> >
> > What we didn't discuss is the variant function that you introduce,
> > while the previous approach was enough.
>
> We discussed about clk_rate_exclusive_put, and that even handle it in
> .remove right? so I have variant to handle it in sun6i_csi_remove.

Any comments?

\
 
 \ /
  Last update: 2019-01-06 17:32    [W:0.069 / U:52.504 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site