lkml.org 
[lkml]   [2019]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [RFC,5/5] mfd: cros_ec: add EC host command support using rpmsg.
Thanks for the review.
I would leave some formatting comment to v2, and reply others first.

On Fri, Jan 4, 2019 at 12:05 AM Enric Balletbo Serra
<eballetbo@gmail.com> wrote:
>
> Hi,
>
> Many thanks for sending this. Please, add Guenter and me for next
> versions, we are interested in it, thanks :)
>
> Missatge de Pi-Hsun Shih <pihsun@chromium.org> del dia dc., 26 de des.
> 2018 a les 8:57:
> >
> > Add EC host command support through rpmsg.
> >
> > Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
> > ---
> > drivers/mfd/cros_ec_dev.c | 9 ++
> > drivers/platform/chrome/Kconfig | 8 ++
> > drivers/platform/chrome/Makefile | 1 +
> > drivers/platform/chrome/cros_ec_rpmsg.c | 164 ++++++++++++++++++++++++
> > include/linux/mfd/cros_ec.h | 1 +
> > include/linux/mfd/cros_ec_commands.h | 2 +
> > 6 files changed, 185 insertions(+)
> > create mode 100644 drivers/platform/chrome/cros_ec_rpmsg.c
> >
> > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> > index 2d0fee488c5aa8..67983853413d07 100644
> > --- a/drivers/mfd/cros_ec_dev.c
> > +++ b/drivers/mfd/cros_ec_dev.c
> > @@ -414,6 +414,15 @@ static int ec_device_probe(struct platform_device *pdev)
> > device_initialize(&ec->class_dev);
> > cdev_init(&ec->cdev, &fops);
> >
> > + if (cros_ec_check_features(ec, EC_FEATURE_SCP)) {
> > + dev_info(dev, "SCP detected.\n");
> > + /*
> > + * Help userspace differentiating ECs from SCP,
> > + * regardless of the probing order.
> > + */
> > + ec_platform->ec_name = CROS_EC_DEV_SCP_NAME;
> > + }
> > +
>
> Why userspace should know that this is an SCP? From the userspace
> point of view shouldn't be this transparent, we don't do distinctions
> when the transport layer is i2c, spi or lpc, and I think that the
> cros_ec_rpmsg driver is a cros-ec transport layer, like these. So, I
> think that this is not needed.
>

Since both the EC and the SCP talk in EC host command format here, and they can
both exist on the same system, if we don't do the distinction, both of them
would be registered as /dev/cros_ec, and cause an error.

This change is actually independent to the rpmsg change (EC through all
transport layer can report that they have feature EC_FEATURE_SCP, and would
then be seen from userspace as /dev/cros_scp), I'll move this to another patch
in v2.

> > /*
> > * Add the class device
> > * Link to the character device for creating the /dev entry
> > diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> > index 16b1615958aa2d..b03d68eb732177 100644
> > --- a/drivers/platform/chrome/Kconfig
> > +++ b/drivers/platform/chrome/Kconfig
> > @@ -72,6 +72,14 @@ config CROS_EC_SPI
> > response time cannot be guaranteed, we support ignoring
> > 'pre-amble' bytes before the response actually starts.
> >
> > +config CROS_EC_RPMSG
> > + tristate "ChromeOS Embedded Controller (rpmsg)"
> > + depends on MFD_CROS_EC && RPMSG
>
> I think that this driver is DT-only, && OF ?

Would add this in v2.

>
> > + help
> > + If you say Y here, you get support for talking to the ChromeOS EC
> > + through rpmsg. This uses a simple byte-level protocol with a
> > + checksum.
> > +
> > config CROS_EC_LPC
> > tristate "ChromeOS Embedded Controller (LPC)"
> > depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST)
> > diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> > index cd591bf872bbe9..3e3190af2b50f4 100644
> > --- a/drivers/platform/chrome/Makefile
> > +++ b/drivers/platform/chrome/Makefile
> > @@ -8,6 +8,7 @@ cros_ec_ctl-objs := cros_ec_sysfs.o cros_ec_lightbar.o \
> > obj-$(CONFIG_CROS_EC_CTL) += cros_ec_ctl.o
> > obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o
> > obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> > +obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
> > cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o
> > cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o
> > obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
> > diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> > new file mode 100644
> > index 00000000000000..f123ca6d1c029c
> > --- /dev/null
> > +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> > @@ -0,0 +1,164 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +//
> > +// Copyright 2018 Google LLC.
> > +
> > +#include <linux/delay.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mfd/cros_ec.h>
> > +#include <linux/mfd/cros_ec_commands.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/rpmsg.h>
> > +#include <linux/slab.h>
> > +
> > +/**
> > + * cros_ec_cmd_xfer_rpmsg - Transfer a message over rpmsg and receive the reply
> > + *
> > + * This is only used for old EC proto version, and is not supported for this
> > + * driver.
> > + *
> > + * @ec_dev: ChromeOS EC device
> > + * @ec_msg: Message to transfer
> > + */
> > +static int cros_ec_cmd_xfer_rpmsg(struct cros_ec_device *ec_dev,
> > + struct cros_ec_command *ec_msg)
> > +{
> > + return -EINVAL;
> > +}
> > +
> > +/**
> > + * cros_ec_pkt_xfer_rpmsg - Transfer a packet over rpmsg and receive the reply
> > + *
> > + * @ec_dev: ChromeOS EC device
> > + * @ec_msg: Message to transfer
> > + */
> > +static int cros_ec_pkt_xfer_rpmsg(struct cros_ec_device *ec_dev,
> > + struct cros_ec_command *ec_msg)
> > +{
> > + struct ec_host_response *response;
> > + struct rpmsg_device *rpdev = ec_dev->priv;
> > + int len;
> > + u8 sum;
> > + int ret;
> > + int i;
> > +
> > + ec_msg->result = 0;
> > + len = cros_ec_prepare_tx(ec_dev, ec_msg);
> > + dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
> > +
> > + // TODO: This currently relies on that mtk_rpmsg send actually blocks
> > + // until ack. Should do the wait here instead.
>
> Use standard C style comments.
>
> > + ret = rpmsg_send(rpdev->ept, ec_dev->dout, len);
> > +
>
> Remove that empty line.
>
> > + if (ret) {
> > + dev_err(ec_dev->dev, "rpmsg send failed\n");
> > + return ret;
> > + }
> > +
> > + /* check response error code */
> > + response = (struct ec_host_response *)ec_dev->din;
> > + ec_msg->result = response->result;
> > +
> > + ret = cros_ec_check_result(ec_dev, ec_msg);
> > + if (ret)
> > + goto exit;
> > +
> > + if (response->data_len > ec_msg->insize) {
> > + dev_err(ec_dev->dev, "packet too long (%d bytes, expected %d)",
> > + response->data_len, ec_msg->insize);
> > + ret = -EMSGSIZE;
> > + goto exit;
> > + }
> > +
> > + /* copy response packet payload and compute checksum */
> > + memcpy(ec_msg->data, ec_dev->din + sizeof(*response),
> > + response->data_len);
> > +
> > + sum = 0;
> > + for (i = 0; i < sizeof(*response) + response->data_len; i++)
> > + sum += ec_dev->din[i];
> > +
> > + if (sum) {
> > + dev_err(ec_dev->dev, "bad packet checksum, calculated %x\n",
> > + sum);
> > + ret = -EBADMSG;
> > + goto exit;
> > + }
> > +
> > + ret = response->data_len;
> > +exit:
> > + if (ec_msg->command == EC_CMD_REBOOT_EC)
> > + msleep(EC_REBOOT_DELAY_MS);
>
> Can you explain why this sleep is needed?

From the comment of EC_CMD_REBOOT_EC: "The EC is unresponsive for a time after
a reboot command. Add a simple delay to make sure that the bus stays locked."

This is copied from other transport layer drivers, and probably not needed
since we would reload the firmware for SCP while it's rebooting. I would test
to see if this is needed when the reboot flow for SCP work as expected.
(There's still some firmware work need to be done before it can be tested...)

>
> > +
> > + return ret;
> > +}
> > +
> > +static int cros_ec_rpmsg_callback(struct rpmsg_device *rpdev, void *data,
> > + int len, void *priv, u32 src)
> > +{
> > + struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> > +
> > + if (len > ec_dev->din_size) {
> > + dev_warn(ec_dev->dev,
> > + "ipi received length %d > din_size, truncating", len);
> > + len = ec_dev->din_size;
> > + }
> > +
> > + memcpy(ec_dev->din, data, len);
> > +
> > + return 0;
> > +}
> > +
> > +static int cros_ec_rpmsg_probe(struct rpmsg_device *rpdev)
> > +{
> > + struct device *dev = &rpdev->dev;
> > +
> Remove that empty line
>
> > + struct cros_ec_device *ec_dev;
> > + int ret;
> > +
> > + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
> > + if (!ec_dev)
> > + return -ENOMEM;
> > +
> > + ec_dev->dev = dev;
> > + ec_dev->priv = rpdev;
> > + ec_dev->cmd_xfer = cros_ec_cmd_xfer_rpmsg;
> > + ec_dev->pkt_xfer = cros_ec_pkt_xfer_rpmsg;
> > + ec_dev->phys_name = dev_name(&rpdev->dev);
> > + ec_dev->din_size = sizeof(struct ec_host_response) +
> > + sizeof(struct ec_response_get_protocol_info);
> > + ec_dev->dout_size = sizeof(struct ec_host_request);
> > + dev_set_drvdata(dev, ec_dev);
> > +
> > + ret = cros_ec_register(ec_dev);
> > + if (ret)
>
> I'd add an error message here
>
> dev_err(dev, "cannot register EC\n"
>
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static void cros_ec_rpmsg_remove(struct rpmsg_device *rpdev)
>
> This function will not be needed after apply [1]. I would recommend
> base your patches on top of [2]
>
> [1] https://lkml.org/lkml/2018/12/12/672
> [2] https://lkml.org/lkml/2018/12/12/679

Noted.

>
> > +{
> > + struct cros_ec_device *ec_dev = dev_get_drvdata(&rpdev->dev);
> > +
> > + cros_ec_remove(ec_dev);
> > +}
> > +
>
> How this driver is instantiated?
>
> I expect something like this here (like the other transport layers)
>
> static const struct of_device_id cros_ec_rpmsg_of_match[] = {
> { .compatible = "google,cros-ec-rpmsg", },
> { }
> };
> MODULE_DEVICE_TABLE(of, cros_ec_rpmsg_of_match);
>
> And the DT containing the compatible = "google,cros-ec-rpmsg" like the
> other cros-ec transport layers.

This is a part that I'm getting quite confused on how to do properly.
For SPI, a spi_device is created for each node listed under spi node in device
tree.
spi0 {
compatible = "xxx-spi";
cros_ec@0 {
compatible = "google,cros-ec-spi";
};
}

For rpmsg, the rpmsg_device are dynamically created from the request
of the SCP, and then a matching rpmsg_driver is used when found.
Currently without the cros-ec-rpmsg being in the device tree, the cros_ec_rpmsg
module would need to be manually loaded by modprobe.

To follow what SPI/I2C does, the device tree would look like:
scp {
compatible = "mediatek,mt8183-scp";
mt8183-rpmsg {
compatible = "mediatek,mt8183-rpmsg";
cros_ec_rpmsg {
compatible = "google,cros-ec-rpmsg";
};
};
};
But the rpmsg driver would not actually create those rpmsg_device on probe, but
only look at those sub node and load the corresponding rpmsg_driver modules.
When requested by SCP to create the rpmsg_device, it would find a matching
rpmsg_driver independent on how the device tree looks.

So my question is, should these dynamically created rpmsg_device be listed on
device tree?

>
> > +static const struct rpmsg_device_id cros_ec_rpmsg_device_id[] = {
> > + { .name = "cros-ec-rpmsg", },
> > + { /* sentinel */ },
>
> I got convinced that the '/* sentinel */' comment doesn't means
> anything, so use { } only here, remove the comment and the last comma
> (there is nothing to separate)
> + { }
>
> > +};
> > +
> > +static struct rpmsg_driver cros_ec_driver_rpmsg = {
> > + .drv.name = KBUILD_MODNAME,
>
> And something like this here
> .drv = {
> .name = "cros-ec-rpmsg",
> .of_match_table = cros_ec_rpmsg_of_match,
> },
>
> > + .id_table = cros_ec_rpmsg_device_id,
> > + .probe = cros_ec_rpmsg_probe,
> > + .remove = cros_ec_rpmsg_remove,
> > + .callback = cros_ec_rpmsg_callback,
> > +};
> > +
> > +module_rpmsg_driver(cros_ec_driver_rpmsg);
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("ChromeOS EC multi function device (rpmsg)");
> > diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> > index de8b588c8776da..fd297cf8f97295 100644
> > --- a/include/linux/mfd/cros_ec.h
> > +++ b/include/linux/mfd/cros_ec.h
> > @@ -24,6 +24,7 @@
> >
> > #define CROS_EC_DEV_NAME "cros_ec"
> > #define CROS_EC_DEV_PD_NAME "cros_pd"
> > +#define CROS_EC_DEV_SCP_NAME "cros_scp"
>
> I think this definition is not needed.
>
> >
> > /*
> > * The EC is unresponsive for a time after a reboot command. Add a
> > diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
> > index fc91082d4c357b..3e5da6e93b2f42 100644
> > --- a/include/linux/mfd/cros_ec_commands.h
> > +++ b/include/linux/mfd/cros_ec_commands.h
> > @@ -856,6 +856,8 @@ enum ec_feature_code {
> > EC_FEATURE_RTC = 27,
> > /* EC supports CEC commands */
> > EC_FEATURE_CEC = 35,
> > + /* The MCU exposes a SCP */
> > + EC_FEATURE_SCP = 39,
>
> Same here, I think this is not needed.
> > };
> >
> > #define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
> > --
> > 2.20.1.415.g653613c723-goog
> >
>
> Thanks,
> Enric

\
 
 \ /
  Last update: 2019-01-04 08:58    [W:0.095 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site