lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 15/19] drm/panel: raspberrypi: use DRM_DEV*
Date
Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
.../gpu/drm/panel/panel-raspberrypi-touchscreen.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 28c0620dfe0f..c9013faff9ed 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -57,6 +57,7 @@
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
+#include <drm/drm_print.h>

#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"

@@ -232,7 +233,7 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,

ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
if (ret)
- dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+ DRM_DEV_ERROR(&ts->dsi->dev, "I2C write failed: %d\n", ret);
}

static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
@@ -324,8 +325,9 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)

mode = drm_mode_duplicate(drm, m);
if (!mode) {
- dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
- m->hdisplay, m->vdisplay, m->vrefresh);
+ DRM_DEV_ERROR(drm->dev,
+ "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, m->vrefresh);
continue;
}

@@ -381,7 +383,7 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,

ver = rpi_touchscreen_i2c_read(ts, REG_ID);
if (ver < 0) {
- dev_err(dev, "Atmel I2C read failed: %d\n", ver);
+ DRM_DEV_ERROR(dev, "Atmel I2C read failed: %d\n", ver);
return -ENODEV;
}

@@ -390,7 +392,9 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
case 0xc3: /* ver 2 */
break;
default:
- dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
+ DRM_DEV_ERROR(dev,
+ "Unknown Atmel firmware revision: 0x%02x\n",
+ ver);
return -ENODEV;
}

@@ -412,8 +416,9 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,

ts->dsi = mipi_dsi_device_register_full(host, &info);
if (IS_ERR(ts->dsi)) {
- dev_err(dev, "DSI device registration failed: %ld\n",
- PTR_ERR(ts->dsi));
+ DRM_DEV_ERROR(dev,
+ "DSI device registration failed: %ld\n",
+ PTR_ERR(ts->dsi));
return PTR_ERR(ts->dsi);
}

@@ -457,7 +462,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);

if (ret)
- dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
+ DRM_DEV_ERROR(&dsi->dev,
+ "failed to attach dsi to host: %d\n", ret);

return ret;
}
--
2.12.0
\
 
 \ /
  Last update: 2019-01-31 20:27    [W:0.185 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site