lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] add support for SAM9X60 pin controller
Date
From: Claudiu Beznea <claudiu.beznea@microchip.com>

This series adds drive strenght and slew rate support for SAMX60's pin
controller. For drive strenght we could have 2 values: low, high.
For slew rate we could have 2 values: enable, disabled.

Besides this I took the chance and adapt the documentation for at91 pinctrl
driver.

Changes in v2:
- s/microchip,sam9x60-pictrl/microchip,sam9x60-pinctrl in patches 3/7, 5/7

Claudiu Beznea (7):
pinctrl: at91: add option to use drive strength bits
pinctrl: at91: add drive strength support for SAM9X60
pinctrl: at91: add compatibles for SAM9X60 pin controller
dt-bindings: add documentation for banks
dt-bindings: add bindings for SAM9X60
pinctrl: at91: add slewrate support for SAM9X60
dt-bindings: add documentation for slew rate

.../bindings/pinctrl/atmel,at91-pinctrl.txt | 27 ++++-
drivers/pinctrl/pinctrl-at91.c | 134 +++++++++++++++++++--
drivers/pinctrl/pinctrl-at91.h | 3 +
include/dt-bindings/pinctrl/at91.h | 4 +
4 files changed, 155 insertions(+), 13 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2019-01-31 17:18    [W:0.745 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site