lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 22/35] ARM: davinci: cp-intc: add the new config structures for da8xx SoCs
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Add the new-style config structures for dm* SoCs. They will be used
once we make the cp-intc driver stop using davinci_soc_info.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/mach-davinci/da830.c | 10 ++++++++++
arch/arm/mach-davinci/da850.c | 10 ++++++++++
2 files changed, 20 insertions(+)

diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 8b9220badef5..6d3da4364f7a 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -12,6 +12,7 @@
#include <linux/clk/davinci.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irqchip/irq-davinci-cp-intc.h>
#include <linux/platform_data/gpio-davinci.h>

#include <asm/mach/map.h>
@@ -742,6 +743,15 @@ void __init da830_init(void)
WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
}

+static const struct davinci_cp_intc_config da830_cp_intc_config = {
+ .reg = {
+ .start = DA8XX_CP_INTC_BASE,
+ .end = DA8XX_CP_INTC_BASE + SZ_8K,
+ .flags = IORESOURCE_MEM,
+ },
+ .num_irqs = DA830_N_CP_INTC_IRQ,
+};
+
void __init da830_init_irqs(void)
{
cp_intc_init();
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 9f48e1ac61fb..5e7f2c962abf 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -18,6 +18,7 @@
#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/init.h>
+#include <linux/irqchip/irq-davinci-cp-intc.h>
#include <linux/mfd/da8xx-cfgchip.h>
#include <linux/platform_data/clk-da8xx-cfgchip.h>
#include <linux/platform_data/clk-davinci-pll.h>
@@ -671,6 +672,15 @@ void __init da850_init(void)
WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module");
}

+static const struct davinci_cp_intc_config da850_cp_intc_config = {
+ .reg = {
+ .start = DA8XX_CP_INTC_BASE,
+ .end = DA8XX_CP_INTC_BASE + SZ_8K,
+ .flags = IORESOURCE_MEM,
+ },
+ .num_irqs = DA850_N_CP_INTC_IRQ,
+};
+
void __init da850_init_irqs(void)
{
cp_intc_init();
--
2.20.1
\
 
 \ /
  Last update: 2019-01-31 14:42    [W:0.574 / U:41.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site