lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/7] mmc: sdhci: add support for using external DMA devices
From
Date
Chunyan,

On 30/01/19 4:35 PM, Chunyan Zhang wrote:
> Some standard SD host controllers can support both external dma
> controllers as well as ADMA/SDMA in which the SD host controller
> acts as DMA master. TI's omap controller is the case as an example.
>
> Currently the generic SDHCI code supports ADMA/SDMA integrated in
> the host controller but does not have any support for external DMA
> controllers implemented using dmaengine, meaning that custom code is
> needed for any systems that use an external DMA controller with SDHCI.
>
> Fixes by Faiz Abbas <faiz_abbas@ti.com>:
> 1. Map scatterlists before dmaengine_prep_slave_sg()
> 2. Use dma_async() functions inside of the send_command() path and
> synchronize once at the start of each request.
>
> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> Changes from the last version:
> * Moved sdhci_set_timeout() from _prepare_data() to its caller -
> sdhci_send_command();
> * Factor out a new function sdhci_reset_data() which deal with sanity
> checks for mmc_data and reset for host->data, these processes were
> in _prepare_data();
> * Factor out a new function sdhci_set_block_info() for configuring data
> blocks which were processing at bottom of _prepare_data();
> * Added a new tasklet and functions for handling external dma error case;
> * Removed sdhci_external_dma_cleanup() which is not used;
> * Added an empty sdhci_external_dma_channel definition for
> !IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA);
> * Addressed some other comments from Adrian:
> - Removed check for MMC_SET_BLOCK_COUNT, left checking !cmd->data only
> which is enough.

There should have been a v2 in the patch description. It lets reviewers
know that they have seen this patch before and its not the same thing. I
would have preferred you had me test this before posting it to the
mailing list. Otherwise there should be a "not tested" in the description.

> ---
> drivers/mmc/host/Kconfig | 3 +
> drivers/mmc/host/sdhci.c | 333 +++++++++++++++++++++++++++++++++++----
> drivers/mmc/host/sdhci.h | 10 ++
> 3 files changed, 317 insertions(+), 29 deletions
[snip]

> +static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
> + struct mmc_command *cmd)
> +{
> + struct mmc_data *data = cmd->data;
> + struct dma_chan *chan = sdhci_external_dma_channel(host, data);
chan is not being used in this function.
> +
> + if (!sdhci_external_dma_setup(host, cmd)) {
> + __sdhci_external_dma_prepare_data(host, cmd);
> } else {
> - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
> + sdhci_external_dma_release(host);
> + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n",
> + mmc_hostname(host->mmc));
> + sdhci_prepare_data(host, cmd);
> + }
> +}
> +
> +static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> + struct mmc_command *cmd)
> +{
> + struct dma_chan *chan;

I think you wanted to initialize this one.

> +
> + if (!cmd->data)
> + return;
> +
> + chan = sdhci_external_dma_channel(host, cmd->data);
> + if (chan)
> + dma_async_issue_pending(chan);
> +}
> +
> +static bool sdhci_external_dma_request_done(struct sdhci_host *host)
> +{
> + struct mmc_request *mrq;
> + struct dma_chan *chan;
> + int i;
> +
> + spin_lock_irqsave(&host->lock, flags);

flags is not declared.

> +
> + for (i = 0; i < SDHCI_MAX_MRQS; i++) {
> + mrq = host->mrqs_done[i];
> + if (mrq)
> + break;
> }
> +
> + spin_unlock_irqrestore(&host->lock, flags);
> +
> + if (!mrq)
> + return true;
> +
> + sdhci_tasklet_finish(host);

This doesn't even build. sdhci_tasklet_finish is declared below this. In
the future, if you don't have a platform to test things on, at least
build and use checkpatch before posting it to the mailing list.

Should we even be calling a tasklet callback function directly?
Shouldn't we do a tasklet_schedule()?

Thanks,
Faiz

\
 
 \ /
  Last update: 2019-01-31 13:29    [W:0.053 / U:7.600 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site