lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V8 3/5] i2c: tegra: Add DMA Support
В Thu, 31 Jan 2019 21:46:48 +0000
Sowjanya Komatineni <skomatineni@nvidia.com> пишет:

> > It works with this change:
> >
> > diff --git a/drivers/i2c/busses/i2c-tegra.c
> > b/drivers/i2c/busses/i2c-tegra.c index fe5b89abc576..8e059e94b94e
> > 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++
> > b/drivers/i2c/busses/i2c-tegra.c @@ -1170,10 +1170,11 @@ static int
> > tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, time_left,
> > completion_done(&i2c_dev->msg_complete), i2c_dev->msg_err);
> >
> > + tegra_i2c_init(i2c_dev, true);
> > +
> > if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
> > return 0;
> >
> > - tegra_i2c_init(i2c_dev, true);
> > /* start recovery upon arbitration loss in single master
> > mode */ if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
> > if (!i2c_dev->is_multimaster_mode)
> >
> >
> > Which means that HW state is kept dirty after DMA transfer. Please
> > check everything carefully.
>
> Identified issue, When I moved logic around for diff changes, INT
> enable isn’t correct for FIFO DATA REQ. Will have proper fix in next
> version.
>

Awesome :)

\
 
 \ /
  Last update: 2019-02-01 01:55    [W:0.085 / U:7.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site