lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/9] Support using MSI interrupts in ntb_transport


On 2019-01-31 3:46 p.m., Dave Jiang wrote:
> I believe irqbalance writes to the file /proc/irq/N/smp_affinity. So
> maybe take a look at the code that starts from there and see if it would
> have any impact on your stuff.

Ok, well on my system I can write to the smp_affinity all day and the
MSI interrupts still work fine.

The MSI code is a bit difficult to trace and audit with all the
different chips and the parent chips which I don't have a good
understanding of. But I can definitely see that it could be possible for
some chips to change the address as smp_affinitiy will eventually
sometimes call msi_domain_set_affinity() which does seem to recompose
the message and write it back to the chip.

So, I could relatively easily add a callback to msi_desc to catch this
and resend the MSI address/data. However, I'm not sure how this is ever
done atomically. It seems like there would be a race while the device
updates its address where old interrupts could be triggered. This race
would be much longer for us when sending this information over the NTB
link. Though, I guess if the only change is that it encodes CPU
information in the address then that would not be an issue. However, I'm
not sure I can say that for certain without a comprehensive
understanding of all the IRQ chips.

Any thoughts on this?

Logan

\
 
 \ /
  Last update: 2019-02-01 00:42    [W:0.047 / U:14.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site