lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] zcrypt: handle AP Info notification from CHSC SEI command
From
Date
On 1/31/19 4:09 AM, Pierre Morel wrote:
> On 30/01/2019 18:48, Tony Krowiak wrote:
>> The current AP bus implementation periodically polls the AP configuration
>> to detect changes. When the AP configuration is dynamically changed
>> via the
>> SE or an SCLP instruction, the changes will not be reflected to sysfs
>> until
>> the next time the AP configuration is polled. The CHSC architecture
>> provides a Store Event Information (SEI)command to make notification
>> of an
>> AP configuration change. This patch introduces a handler to process
>> notification from the CHSC SEI command BY immediately kickING off an
>> AP bus
>> scan.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
>> ---
>>   arch/s390/include/asm/ap.h   | 12 ++++++++++++
>>   drivers/s390/cio/chsc.c      | 12 ++++++++++++
>>   drivers/s390/cio/chsc.h      |  1 +
>>   drivers/s390/crypto/ap_bus.c | 12 ++++++++++++
>>   4 files changed, 37 insertions(+)
>>
>> diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
>> index 1a6a7092d942..c778593d509f 100644
>> --- a/arch/s390/include/asm/ap.h
>> +++ b/arch/s390/include/asm/ap.h
>> @@ -360,4 +360,16 @@ static inline struct ap_queue_status
>> ap_dqap(ap_qid_t qid,
>>       return reg1;
>>   }
>> +/*
>> + * Interface to tell the AP bus code that a configuration
>> + * change has happened. The bus code should at least do
>> + * an ap bus resource rescan.
>> + */
>> +#if IS_ENABLED(CONFIG_ZCRYPT)
>> +void ap_bus_cfg_chg(void);
>> +#else
>> +#error "no CONFIG_ZCRYPT"
>> +static void ap_bus_cfg_chg(void){};
>> +#endif
>> +
>>   #endif /* _ASM_S390_AP_H_ */
>> diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
>> index a0baee25134c..dccccc337078 100644
>> --- a/drivers/s390/cio/chsc.c
>> +++ b/drivers/s390/cio/chsc.c
>> @@ -586,6 +586,15 @@ static void chsc_process_sei_scm_avail(struct
>> chsc_sei_nt0_area *sei_area)
>>                     " failed (rc=%d).\n", ret);
>>   }
>> +static void chsc_process_sei_ap_cfg_chg(struct chsc_sei_nt0_area
>> *sei_area)
>> +{
>> +    CIO_CRW_EVENT(3, "chsc: ap config changed\n");
>> +    if (sei_area->rs != 5)
>
> Why just return if the rs code is 5?
>
> The event content code concerns the AP configuration change.
>
> Should the source of the reporting of this change hold us from
> rescanning the available AP?

Why rescan if the RS code does not indicate the AP configuration
changed?

>
>
> Regards,
> Pierre
>
>
>> +        return;
>> +
>> +    ap_bus_cfg_chg();
>> +}
>> +
>>   static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
>>   {
>>       switch (sei_area->cc) {
>> @@ -612,6 +621,9 @@ static void chsc_process_sei_nt0(struct
>> chsc_sei_nt0_area *sei_area)
>>       case 2: /* i/o resource accessibility */
>>           chsc_process_sei_res_acc(sei_area);
>>           break;
>> +    case 3: /* ap config changed */
>> +        chsc_process_sei_ap_cfg_chg(sei_area);
>> +        break;
>>       case 7: /* channel-path-availability information */
>>           chsc_process_sei_chp_avail(sei_area);
>>           break;
>> diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
>> index 78aba8d94eec..5651066c46e3 100644
>> --- a/drivers/s390/cio/chsc.h
>> +++ b/drivers/s390/cio/chsc.h
>> @@ -9,6 +9,7 @@
>>   #include <asm/chsc.h>
>>   #include <asm/schid.h>
>>   #include <asm/qdio.h>
>> +#include <asm/ap.h>
>>   #define CHSC_SDA_OC_MSS   0x2
>> diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
>> index 48ea0004a56d..94f621783d6b 100644
>> --- a/drivers/s390/crypto/ap_bus.c
>> +++ b/drivers/s390/crypto/ap_bus.c
>> @@ -35,6 +35,7 @@
>>   #include <linux/mod_devicetable.h>
>>   #include <linux/debugfs.h>
>>   #include <linux/ctype.h>
>> +#include <asm/crw.h>
>>   #include "ap_bus.h"
>>   #include "ap_debug.h"
>> @@ -860,6 +861,17 @@ void ap_bus_force_rescan(void)
>>   EXPORT_SYMBOL(ap_bus_force_rescan);
>>   /*
>> +* A config change has happened, Force an ap bus rescan.
>> +*/
>> +void ap_bus_cfg_chg(void)
>> +{
>> +    AP_DBF(DBF_INFO, "%s config change, forcing bus rescan\n",
>> __func__);
>> +
>> +    ap_bus_force_rescan();
>> +}
>> +EXPORT_SYMBOL(ap_bus_cfg_chg);
>> +
>> +/*
>>    * hex2bitmap() - parse hex mask string and set bitmap.
>>    * Valid strings are "0x012345678" with at least one valid hex number.
>>    * Rest of the bitmap to the right is padded with 0. No spaces allowed
>>
>
>

\
 
 \ /
  Last update: 2019-02-01 00:33    [W:0.199 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site