lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH v3 06/10] devicetree: bindings: Document first ROHM BD70528 bindings
On Wed, Jan 30, 2019 at 11:09:55AM +0200, Matti Vaittinen wrote:
> Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
> drivers) and 4 GPIO pins which can be configured for I/O or
> as interrupt sources withe configurable trigger levels.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
> .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt | 104 +++++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> new file mode 100644
> index 000000000000..21801440a53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> @@ -0,0 +1,104 @@
> +* ROHM BD70528 Power Management Integrated Circuit bindings
> +
> +BD70528MWV is an ultra-low Iq general purpose single-chip power management IC
> +for battery-powered portable devices. The IC integrates 3 ultra-low current
> +consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4
> +GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF
> +for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC
> +for battery temperature monitor and 1S battery charger with scalable charge
> +currents.
> +
> +Required properties:
> + - compatible : Should be "rohm,bd70528"
> + - reg : I2C slave address.
> + - interrupt-parent : Phandle to the parent interrupt controller.

Don't document this. It is implied and could be in a parent node.

> + - interrupts : The interrupt line the device is connected to.
> + - interrupt-controller : To indicate bd70528 acts as an interrupt controller.
> + - #interrupt-cells : Should be 2. usage is compliant to the 2 cells
> + variant of ../interrupt-controller/interrupts.txt
> + - gpio-controller : To indicate bd70528 acts as a gpio controller.
> + - #gpio-cells : Should be 2. The first cell is the pin number and
> + the second cell is used to specify flags. See
> + ../gpio/gpio.txt for more information.
> + - clock-frequency : Should be 32768

Forget to drop this?

> + - #clock-cells : Should be 0.
> + - regulators: : List of child nodes that specify the regulators.
> + Please see ../regulator/rohm,bd70528-regulator.txt
> +
> +Optional properties:
> + - clock-output-names : Should contain name for output clock.
> +
> +Example:
> +/* external oscillator */
> +osc: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <1>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc";
> +};
> +
> +pmic: bd70528@4b {

pmic@4b

Node names should be generic.

> + compatible = "rohm,bd70528";
> + reg = <0x4b>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 GPIO_ACTIVE_LOW>;
> + clocks = <&osc 0>;
> + #clock-cells = <0>;
> + clock-output-names = "bd70528-32k-out";
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + regulators {
> + buck1: BUCK1 {
> + regulator-name = "buck1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3400000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <125>;
> + };
> + buck2: BUCK2 {
> + regulator-name = "buck2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <125>;
> + };
> + buck3: BUCK3 {
> + regulator-name = "buck3";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-ramp-delay = <250>;
> + };
> + ldo1: LDO1 {
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> + ldo2: LDO2 {
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo3: LDO3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + led_ldo1: LED_LDO1 {
> + regulator-name = "led_ldo1";
> + regulator-min-microvolt = <200000>;
> + regulator-max-microvolt = <300000>;
> + };
> + led_ldo2: LED_LDO2 {
> + regulator-name = "led_ldo2";
> + regulator-min-microvolt = <200000>;
> + regulator-max-microvolt = <300000>;
> + };
> + };
> +};
> --
> 2.14.3
>
>
> --
> Matti Vaittinen
> ROHM Semiconductors Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~

\
 
 \ /
  Last update: 2019-01-30 19:54    [W:0.080 / U:7.640 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site