lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 08/20] iommu/mediatek: Add larb-id remapped support
On Mon, Dec 31, 2018 at 7:58 PM Yong Wu <yong.wu@mediatek.com> wrote:
>
> The larb-id may be remapped in the smi-common, this means the
> larb-id reported in the mtk_iommu_isr isn't the real larb-id,
>
> Take mt8183 as a example:
> M4U
> |
> ---------------------------------------------
> | SMI common |
> -0-----7-----5-----6-----1-----2------3-----4- <- Id remapped
> | | | | | | | |
> larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU
> disp vdec img cam venc img cam
> As above, larb0 connects with the id 0 in smi-common.
> larb1 connects with the id 7 in smi-common.
> ...
> If the larb-id reported in the isr is 7, actually it's larb1(vdec).
> In order to output the right larb-id in the isr, we add a larb-id
> remapping relationship in this patch.
>
> If there is no this larb-id remapping in some SoCs, use the linear
> mapping array instead.
>
> This also is a preparing patch for mt8183.
>
> Signed-off-by: Yong Wu <yong.wu@mediatek.com>
> ---
> drivers/iommu/mtk_iommu.c | 4 ++++
> drivers/iommu/mtk_iommu.h | 2 ++
> 2 files changed, 6 insertions(+)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 847082c..eca1536 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -220,6 +220,8 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
> fault_larb = F_MMU0_INT_ID_LARB_ID(regval);
> fault_port = F_MMU0_INT_ID_PORT_ID(regval);
>
> + fault_larb = data->plat_data->larbid_remap[fault_larb];
> +
> if (report_iommu_fault(&dom->domain, data->dev, fault_iova,
> write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
> dev_err_ratelimited(
> @@ -742,12 +744,14 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> .m4u_plat = M4U_MT2712,
> .has_4gb_mode = true,
> .has_bclk = true,
> + .larbid_remap = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
> };
>
> static const struct mtk_iommu_plat_data mt8173_data = {
> .m4u_plat = M4U_MT8173,
> .has_4gb_mode = true,
> .has_bclk = true,
> + .larbid_remap = {0, 1, 2, 3, 4, 5}, /* Linear mapping. */

I briefly considered bikeshedding about how to define these arrays in
a way that might save memory for linear-map devices, but then decided
this is fine.

Reviewed-by: Evan Green <evgreen@chromium.org>

\
 
 \ /
  Last update: 2019-01-30 19:36    [W:0.145 / U:5.296 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site