lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] Add nvmem support on STM32
Date
Non volatile memory area is available on STM32. It contains various
factory programmed information such as unique device ID, analog calibration...
This patchset adds NVMEM support to access these data.

Fabrice Gasnier (4):
dt-bindings: nvmem: Add STM32 factory-programmed romem
nvmem: Add driver for STM32 factory-programmed read only mem
nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c

.../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++
arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++
drivers/nvmem/Kconfig | 10 +
drivers/nvmem/Makefile | 2 +
drivers/nvmem/stm32-romem.c | 202 +++++++++++++++++++++
5 files changed, 258 insertions(+)
create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
create mode 100644 drivers/nvmem/stm32-romem.c

--
1.9.1

\
 
 \ /
  Last update: 2019-01-30 17:40    [W:0.077 / U:15.892 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site