lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] SMSC USB333x ULPI USB PHY Support
Date
This series adds support for the SMSC USB333x ULPI USB PHY.

The USB333x usually does not require particular configuration as it
implements generic registers described in the ULPI specification.

However, specific use cases require tweaking some bits. In our case,
VBUS is not connected to anything so the internal EXTVBUS signal has to
be routed to assert VbusValid.

Paul Kocialkowski (3):
dt-bindings: phy: Add bindings for the SMSC USB333x ULPI USB PHY
phy: Add support for the SMSC USB333x ULPI USB PHY
MAINTAINERS: Add entry for the SMSC USB333x ULPI USB PHY

.../devicetree/bindings/phy/smsc-usb333x.txt | 50 +++
MAINTAINERS | 6 +
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/smsc/Kconfig | 11 +
drivers/phy/smsc/Makefile | 2 +
drivers/phy/smsc/phy-usb333x.c | 301 ++++++++++++++++++
7 files changed, 372 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/smsc-usb333x.txt
create mode 100644 drivers/phy/smsc/Kconfig
create mode 100644 drivers/phy/smsc/Makefile
create mode 100644 drivers/phy/smsc/phy-usb333x.c

--
2.20.1

\
 
 \ /
  Last update: 2019-01-30 17:00    [W:0.087 / U:17.452 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site