lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V2 0/4] irq: imx-irqsteer: add 32 interrupts chan and multi outputs support
Date
Not all 64 interrupts may be used in one group. e.g. most irqsteer in
imx8qxp and imx8qm subsystems supports only 32 interrupts.
And one irqsteer channel can support up to 8 output interrupts.

This patch series aims to support 32 interrupts chan and multi output
interrupts.

Tested on:
iMX8QXP MEK with MIPI CSI capture and DC Display
iMX8MQ EVK with MIPI DSI Display

Dong Aisheng (4):
dt-binding: irq: imx-irqsteer: use irq number instead of group number
dt-bindings: irq: imx-irqsteer: add multi output interrupts support
irq: imx-irqsteer: change to use reg_num instead of irq_group
irq: imx: irqsteer: add multi output interrupts support

.../bindings/interrupt-controller/fsl,irqsteer.txt | 11 ++-
drivers/irqchip/irq-imx-irqsteer.c | 103 +++++++++++++++------
2 files changed, 80 insertions(+), 34 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2019-01-30 14:06    [W:0.105 / U:86.824 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site