lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 12/26] arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking
From
Date


On 23/01/2019 10:44, Julien Thierry wrote:
>
>
> On 22/01/2019 15:21, Catalin Marinas wrote:
>> On Mon, Jan 21, 2019 at 03:33:31PM +0000, Julien Thierry wrote:
>>> diff --git a/arch/arm64/include/asm/irqflags.h b/arch/arm64/include/asm/irqflags.h
>>> index 24692ed..7e82a92 100644
>>> --- a/arch/arm64/include/asm/irqflags.h
>>> +++ b/arch/arm64/include/asm/irqflags.h
>>> @@ -18,7 +18,9 @@
>>>
>>> #ifdef __KERNEL__
>>>
>>> +#include <asm/alternative.h>
>>> #include <asm/ptrace.h>
>>> +#include <asm/sysreg.h>
>>>
>>> /*
>>> * Aarch64 has flags for masking: Debug, Asynchronous (serror), Interrupts and
>>> @@ -36,33 +38,31 @@
>>> /*
>>> * CPU interrupt mask handling.
>>> */
>>> -static inline unsigned long arch_local_irq_save(void)
>>> -{
>>> - unsigned long flags;
>>> - asm volatile(
>>> - "mrs %0, daif // arch_local_irq_save\n"
>>> - "msr daifset, #2"
>>> - : "=r" (flags)
>>> - :
>>> - : "memory");
>>> - return flags;
>>> -}
>>> -
>>> static inline void arch_local_irq_enable(void)
>>> {
>>> - asm volatile(
>>> - "msr daifclr, #2 // arch_local_irq_enable"
>>> - :
>>> + unsigned long unmasked = GIC_PRIO_IRQON;
>>> +
>>> + asm volatile(ALTERNATIVE(
>>> + "msr daifclr, #2 // arch_local_irq_enable\n"
>>> + "nop",
>>> + "msr_s " __stringify(SYS_ICC_PMR_EL1) ",%0\n"
>>> + "dsb sy",
>>> + ARM64_HAS_IRQ_PRIO_MASKING)
>>> :
>>> + : "r" (unmasked)
>>> : "memory");
>>> }
>>>
>>> static inline void arch_local_irq_disable(void)
>>> {
>>> - asm volatile(
>>> - "msr daifset, #2 // arch_local_irq_disable"
>>> - :
>>> + unsigned long masked = GIC_PRIO_IRQOFF;
>>> +
>>> + asm volatile(ALTERNATIVE(
>>> + "msr daifset, #2 // arch_local_irq_disable",
>>> + "msr_s " __stringify(SYS_ICC_PMR_EL1) ", %0",
>>> + ARM64_HAS_IRQ_PRIO_MASKING)
>>> :
>>> + : "r" (masked)
>>> : "memory");
>>> }
>>
>> Nitpicks: you could drop masked/unmasked variables here (it's up to you,
>> it wouldn't make any difference on the generated asm).
>>
>
> Good point, I'll do that.
>
>>> @@ -71,12 +71,44 @@ static inline void arch_local_irq_disable(void)
>>> */
>>> static inline unsigned long arch_local_save_flags(void)
>>> {
>>> + unsigned long daif_bits;
>>> unsigned long flags;
>>> - asm volatile(
>>> - "mrs %0, daif // arch_local_save_flags"
>>> - : "=r" (flags)
>>> - :
>>> +
>>> + daif_bits = read_sysreg(daif);
>>> +
>>> + /*
>>> + * The asm is logically equivalent to:
>>> + *
>>> + * if (system_uses_irq_prio_masking())
>>> + * flags = (daif_bits & PSR_I_BIT) ?
>>> + * GIC_PRIO_IRQOFF :
>>> + * read_sysreg_s(SYS_ICC_PMR_EL1);
>>> + * else
>>> + * flags = daif_bits;
>>> + */
>>> + asm volatile(ALTERNATIVE(
>>> + "mov %0, %1\n"
>>> + "nop\n"
>>> + "nop",
>>> + "mrs_s %0, " __stringify(SYS_ICC_PMR_EL1) "\n"
>>> + "ands %1, %1, " __stringify(PSR_I_BIT) "\n"
>>> + "csel %0, %0, %2, eq",
>>> + ARM64_HAS_IRQ_PRIO_MASKING)
>>> + : "=&r" (flags), "+r" (daif_bits)
>>> + : "r" (GIC_PRIO_IRQOFF)
>>> : "memory");
>>> +
>>> + return flags;
>>> +}
>>
>> BTW, how's the code generated from the C version? It will have a branch
>> but may not be too bad. Either way is fine by me.
>>
>
> It's a bit hard to talk about the code generated from the C version as
> it can lie within several layers of inline, so the instructions for that
> section are a bit more scattered.
>
> However, it seems like the compiler is more clever (maybe the asm
> volatile prevents some optimizations regarding register allocation or
> instruction ordering) and the C version seems to perform slightly better
> (although it could be within the noise) despite the branch.
>
> So, I'll just switch up to the C version.
>

I remember a reason to stick to the asm version. There is a time
interval between the (early) CPU feature being enabled and the (early)
alternatives being applied.

For the early ones, interrupts remain disabled between CPU feature
enabling and alternative application. However, if you enable lockdep, it
will do some interrupts_disabled() checks which become
local_irqs_disabled_flags(local_save_flags()). If one is using the
alternative and the other the static branch, lockdep will emit a warning
about it.

So, I tried moving all irqflags functions but using the static branch
for arch_local_irq_restore() slows things down a bit, and I'm not sure
having arch_local_irq_save() use static branch while
arch_local_irq_restore() uses alternative makes much sense.

In the end, I'll stick to the ASM + alternative version to avoid the
lockdep issue and have consistant manipulation of the irqflags.

Thanks,

--
Julien Thierry

\
 
 \ /
  Last update: 2019-01-30 12:53    [W:0.480 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site