lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 08/10] remoteproc: q6v5-mss: Active powerdomain for SDM845
On Wed 30 Jan 16:39 PST 2019, Bjorn Andersson wrote:

> The SDM845 MSS needs the load_state powerdomain voted for during the
> duration of the MSS being powered on, to let the AOSS know that it may
> not perform certain power save measures. So vote for this.
>
> Tested-by: Sibi Sankar <sibis@codeaurora.org>
> Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>

Applied

> Changes since v4:
> - None
>
> Changes since v3:
> - None
>
> drivers/remoteproc/qcom_q6v5_mss.c | 31 ++++++++++++++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index c32c63e351a0..e30f5486fd20 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -133,6 +133,7 @@ struct rproc_hexagon_res {
> char **proxy_clk_names;
> char **reset_clk_names;
> char **active_clk_names;
> + char **active_pd_names;
> char **proxy_pd_names;
> int version;
> bool need_mem_protection;
> @@ -159,10 +160,12 @@ struct q6v5 {
> struct clk *active_clks[8];
> struct clk *reset_clks[4];
> struct clk *proxy_clks[4];
> + struct device *active_pds[1];
> struct device *proxy_pds[3];
> int active_clk_count;
> int reset_clk_count;
> int proxy_clk_count;
> + int active_pd_count;
> int proxy_pd_count;
>
> struct reg_info active_regs[1];
> @@ -730,10 +733,16 @@ static int q6v5_mba_load(struct q6v5 *qproc)
>
> qcom_q6v5_prepare(&qproc->q6v5);
>
> + ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count);
> + if (ret < 0) {
> + dev_err(qproc->dev, "failed to enable active power domains\n");
> + goto disable_irqs;
> + }
> +
> ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> if (ret < 0) {
> dev_err(qproc->dev, "failed to enable proxy power domains\n");
> - goto disable_irqs;
> + goto disable_active_pds;
> }
>
> ret = q6v5_regulator_enable(qproc, qproc->proxy_regs,
> @@ -839,6 +848,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> qproc->proxy_reg_count);
> disable_proxy_pds:
> q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> +disable_active_pds:
> + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
> disable_irqs:
> qcom_q6v5_unprepare(&qproc->q6v5);
>
> @@ -878,6 +889,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> qproc->active_clk_count);
> q6v5_regulator_disable(qproc, qproc->active_regs,
> qproc->active_reg_count);
> + q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
>
> /* In case of failure or coredump scenario where reclaiming MBA memory
> * could not happen reclaim it here.
> @@ -1412,11 +1424,19 @@ static int q6v5_probe(struct platform_device *pdev)
> }
> qproc->active_reg_count = ret;
>
> + ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
> + desc->active_pd_names);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to attach active power domains\n");
> + goto free_rproc;
> + }
> + qproc->active_pd_count = ret;
> +
> ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
> desc->proxy_pd_names);
> if (ret < 0) {
> dev_err(&pdev->dev, "Failed to init power domains\n");
> - goto free_rproc;
> + goto detach_active_pds;
> }
> qproc->proxy_pd_count = ret;
>
> @@ -1452,6 +1472,8 @@ static int q6v5_probe(struct platform_device *pdev)
>
> detach_proxy_pds:
> q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> +detach_active_pds:
> + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
> free_rproc:
> rproc_free(rproc);
>
> @@ -1469,6 +1491,7 @@ static int q6v5_remove(struct platform_device *pdev)
> qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
> qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
>
> + q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
> q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
>
> rproc_free(qproc->rproc);
> @@ -1495,6 +1518,10 @@ static const struct rproc_hexagon_res sdm845_mss = {
> "mnoc_axi",
> NULL
> },
> + .active_pd_names = (char*[]){
> + "load_state",
> + NULL
> + },
> .proxy_pd_names = (char*[]){
> "cx",
> "mx",
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2019-01-31 05:52    [W:0.146 / U:35.064 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site