lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/4] mfd: max77620: add documentation for low battery monitoring
From
Date
On 1/31/2019 3:53 AM, Rob Herring wrote:
> On Tue, Jan 29, 2019 at 04:55:31PM +0800, Mark Zhang wrote:
>> Adding documentation for low battery monitor properties:
>> - maxim,low-battery-dac-enable
>> - maxim,low-battery-dac-disable
>> - maxim,low-battery-shutdown-enable
>> - maxim,low-battery-shutdown-disable
>> - maxim,low-battery-reset-enable
>> - maxim,low-battery-reset-disable
>>
>> Signed-off-by: Mark Zhang <markz@nvidia.com>
>> ---
>> Documentation/devicetree/bindings/mfd/max77620.txt | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
>> index 484b17e4fba5..5fed0a463b80 100644
>> --- a/Documentation/devicetree/bindings/mfd/max77620.txt
>> +++ b/Documentation/devicetree/bindings/mfd/max77620.txt
>> @@ -142,6 +142,20 @@ Optional properties:
>> Device supports 100/1000/3000/6000 Ohms.
>> Default will be set to 1000 Ohm.
>>
>> +Low-Battery Monitor:
>> +==================
>> +This sub-node configure low battery monitor configuration registers. Device has
>> +support for low-battery monitor configuration through child DT node
>> +"low-battery-monitor".
>> +
>> +Optional properties:
>> + - maxim,low-battery-dac-enable: Enable low battery DAC.
>> + - maxim,low-battery-dac-disable: Disable low battery DAC.
>> + - maxim,low-battery-shutdown-enable: Enable low battery shutdown.
>> + - maxim,low-battery-shutdown-disable: Disable low battery shutdown.
>> + - maxim,low-battery-reset-enable: Enable low battery reset.
>> + - maxim,low-battery-reset-disable: Disable low battery reset.
>
> Do you really need 3 states with the 3rd being prop not present.

Yeah, so I think we can just keep 3 of them and shorten the names a little bit
(lbm stands for "low battery monitoring"):
- maxim,lbm-dac-enable
- maxim,lbm-shutdown-enable
- maxim,lbm-reset-enable

Does this look good to you?
Mark

>
> Rob
>

\
 
 \ /
  Last update: 2019-01-31 03:30    [W:0.051 / U:2.956 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site