lkml.org 
[lkml]   [2019]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] bindings: sound: davinci-mcasp: Document GPIO support
Date
McASP pins can be used as GPIO, add optional section to enable GPIO support
for McASP.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
.../bindings/sound/davinci-mcasp-audio.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index b279b6072bd5..a58f79f5345c 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -45,6 +45,23 @@ Optional properties:
- fck_parent : Should contain a valid clock name which will be used as parent
for the McASP fck

+Optional GPIO support:
+If any McASP pin need to be used as GPIO then the McASP node must have:
+...
+ gpio-controller
+ #gpio-cells = <2>;
+...
+
+When requesting a GPIO, the first parameter is the PIN index in McASP_P*
+registers.
+For example to request the AXR2 pin of mcasp8:
+function-gpios = <&mcasp8 2 0>;
+
+Or to request the ACLKR pin of mcasp8:
+function-gpios = <&mcasp8 29 0>;
+
+For generic gpio information, please refer to bindings/gpio/gpio.txt
+
Example:

mcasp0: mcasp0@1d00000 {
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-01-03 15:05    [W:0.065 / U:0.636 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site