lkml.org 
[lkml]   [2019]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v1] dmaengine: stm32-dma: check FIFO error interrupt enable
Date
For avoiding false FIFO detection, check FIFO Error interrupt is
enabled prior raising any errors.
This will prevent having spurious FIFO error where it shouldn't.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
---
Version history:
v1:
* Initial
---
---
drivers/dma/stm32-dma.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 4903a40..48f7c0f 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -641,12 +641,13 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid)
{
struct stm32_dma_chan *chan = devid;
struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan);
- u32 status, scr;
+ u32 status, scr, sfcr;

spin_lock(&chan->vchan.lock);

status = stm32_dma_irq_status(chan);
scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id));
+ sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id));

if (status & STM32_DMA_TCI) {
stm32_dma_irq_clear(chan, STM32_DMA_TCI);
@@ -661,10 +662,12 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid)
if (status & STM32_DMA_FEI) {
stm32_dma_irq_clear(chan, STM32_DMA_FEI);
status &= ~STM32_DMA_FEI;
- if (!(scr & STM32_DMA_SCR_EN))
- dev_err(chan2dev(chan), "FIFO Error\n");
- else
- dev_dbg(chan2dev(chan), "FIFO over/underrun\n");
+ if (sfcr & STM32_DMA_SFCR_FEIE) {
+ if (!(scr & STM32_DMA_SCR_EN))
+ dev_err(chan2dev(chan), "FIFO Error\n");
+ else
+ dev_dbg(chan2dev(chan), "FIFO over/underrun\n");
+ }
}
if (status) {
stm32_dma_irq_clear(chan, status);
--
2.7.4
\
 
 \ /
  Last update: 2019-01-03 11:18    [W:0.041 / U:0.216 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site