lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] arm64: dts: juno: Add cpu dynamic-power-coefficient information
On Mon, Jan 28, 2019 at 04:55:21PM +0000, Quentin Perret wrote:
> From: Dietmar Eggemann <dietmar.eggemann@arm.com>
>
> A CPUfreq driver, like the scpi driver used on Juno boards, which
> provide the Energy Model with power cost information via the PM_OPP
> of_dev_pm_opp_get_cpu_power() function, do need the
> dynamic-power-coefficient (C) in the device tree.
>
> Method used to obtain the C value:
> C is computed by measuring energy (E) consumption of a frequency domain
> (FD) over a 10s runtime (t) sysbench workload running at each Operating
> Performance Point (OPP) affine to 1 or 2 CPUs of that FD while the other
> CPUs of the system are hotplugged out.
> By definition all CPUs of a FD have the the same micro-architecture. An
> OPP is characterized by a certain frequency (f) and voltage (V) value.
> The corresponding power values (P) are calculated by dividing the delta
> of the E values between the runs with 2 and 1 CPUs by t.
>
> With n data tuples (P, f, V), n equal to number of OPPs for this
> frequency domain, we can solve C by:
>
> P = Pstat + Pdyn
>
> P = Pstat + CV²f
>
> Cx = (Px - P1)/(Vx²fx - V1²f1) with x = {2, ..., n}
>
> The C value is the arithmetic mean out of {C2, ..., Cn}.
>
> Since DVFS is broken on Juno r1, no dynamic-power-coefficient
> information has been added to its dts file.
>

Since the binding for "dynamic-power-coefficient" property already exist,
and I don't see any dependency for this and the next patch(TC2) on this
series, I will apply them. Please shout if for any reason that's not true.

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2019-01-29 16:28    [W:0.197 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site