lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 4/4] perf/smmuv3_pmu: Enable HiSilicon Erratum 162001800 quirk
Date


> -----Original Message-----
> From: Robin Murphy [mailto:robin.murphy@arm.com]
> Sent: 25 January 2019 18:33
> To: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>;
> lorenzo.pieralisi@arm.com
> Cc: jean-philippe.brucker@arm.com; will.deacon@arm.com;
> mark.rutland@arm.com; Guohanjun (Hanjun Guo) <guohanjun@huawei.com>;
> John Garry <john.garry@huawei.com>; pabba@codeaurora.org;
> vkilari@codeaurora.org; rruigrok@codeaurora.org; linux-acpi@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Linuxarm
> <linuxarm@huawei.com>; neil.m.leeder@gmail.com
> Subject: Re: [PATCH v5 4/4] perf/smmuv3_pmu: Enable HiSilicon Erratum
> 162001800 quirk
>
> On 30/11/2018 15:47, Shameer Kolothum wrote:
> > HiSilicon erratum 162001800 describes the limitation of
> > SMMUv3 PMCG implementation on HiSilicon Hip08 platforms.
> >
> > On these platforms, the PMCG event counter registers
> > (SMMU_PMCG_EVCNTRn) are read only and as a result it
> > is not possible to set the initial counter period value
> > on event monitor start.
> >
> > To work around this, the current value of the counter
> > is read and used for delta calculations. OEM information
> > from ACPI header is used to identify the affected hardware
> > platforms.
> >
> > Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
> > ---
> > drivers/acpi/arm64/iort.c | 30 +++++++++++++++++++++++++++---
> > drivers/perf/arm_smmuv3_pmu.c | 35
> +++++++++++++++++++++++++++++------
> > include/linux/acpi_iort.h | 3 +++
> > 3 files changed, 59 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
> > index 2da08e1..d174379 100644
> > --- a/drivers/acpi/arm64/iort.c
> > +++ b/drivers/acpi/arm64/iort.c
> > @@ -1364,6 +1364,22 @@ static void __init
> arm_smmu_v3_pmcg_init_resources(struct resource *res,
> > ACPI_EDGE_SENSITIVE, &res[2]);
> > }
> >
> > +static struct acpi_platform_list pmcg_evcntr_rdonly_list[] __initdata = {
> > + /* HiSilicon Erratum 162001800 */
> > + {"HISI ", "HIP08 ", 0, ACPI_SIG_IORT, greater_than_or_equal},
> > + { }
> > +};
> > +
> > +static int __init arm_smmu_v3_pmcg_add_platdata(struct platform_device
> *pdev)
> > +{
> > + u32 options = 0;
> > +
> > + if (acpi_match_platform_list(pmcg_evcntr_rdonly_list) >= 0)
> > + options |= IORT_PMCG_EVCNTR_RDONLY;
>
> Hmm, do we want IORT code to have to understand a (potential) whole load
> of PMCG-specific quirks directly, or do we really only need to pass some
> unambiguous identifier for the PMCG implementation, and let the driver
> handle the details in private - much like the SMMU model field, only
> without an external spec to constrain us :)

Could do that, but was not sure about coming up with an identifier which is not
really part of the spec and placing that in IORT code. Personally I prefer having
all this private to driver rather than in IORT code. But I see your point that this
will be more like smmu if we can pass identifiers here.

> If we ever want to have named imp-def events, we'd need to do something
> like that anyway, so perhaps we might be better off taking that approach
> to begin with (and if so, I'd be inclined to push the basic platdata
> initialisation for "generic PMCG" into patch #1).

Ok. I will give that a try in next respin.

> > +
> > + return platform_device_add_data(pdev, &options, sizeof(options));
> > +}
> > +
> > struct iort_dev_config {
> > const char *name;
> > int (*dev_init)(struct acpi_iort_node *node);
> > @@ -1374,6 +1390,7 @@ struct iort_dev_config {
> > struct acpi_iort_node *node);
> > void (*dev_set_proximity)(struct device *dev,
> > struct acpi_iort_node *node);
> > + int (*dev_add_platdata)(struct platform_device *pdev);
> > };
> >
> > static const struct iort_dev_config iort_arm_smmu_v3_cfg __initconst = {
> > @@ -1395,6 +1412,7 @@ static const struct iort_dev_config
> iort_arm_smmu_v3_pmcg_cfg __initconst = {
> > .name = "arm-smmu-v3-pmu",
> > .dev_count_resources = arm_smmu_v3_pmcg_count_resources,
> > .dev_init_resources = arm_smmu_v3_pmcg_init_resources,
> > + .dev_add_platdata = arm_smmu_v3_pmcg_add_platdata,
> > };
> >
> > static __init const struct iort_dev_config *iort_get_dev_cfg(
> > @@ -1455,10 +1473,16 @@ static int __init
> iort_add_platform_device(struct acpi_iort_node *node,
> > goto dev_put;
> >
> > /*
> > - * Add a copy of IORT node pointer to platform_data to
> > - * be used to retrieve IORT data information.
> > + * Platform devices based on PMCG nodes uses platform_data to
> > + * pass quirk flags to the driver. For others, add a copy of
> > + * IORT node pointer to platform_data to be used to retrieve
> > + * IORT data information.
> > */
> > - ret = platform_device_add_data(pdev, &node, sizeof(node));
> > + if (ops->dev_add_platdata)
> > + ret = ops->dev_add_platdata(pdev);
> > + else
> > + ret = platform_device_add_data(pdev, &node, sizeof(node));
> > +
> > if (ret)
> > goto dev_put;
> >
> > diff --git a/drivers/perf/arm_smmuv3_pmu.c
> b/drivers/perf/arm_smmuv3_pmu.c
> > index 71d10a0..02107a1 100644
> > --- a/drivers/perf/arm_smmuv3_pmu.c
> > +++ b/drivers/perf/arm_smmuv3_pmu.c
> > @@ -35,6 +35,7 @@
> > */
> >
> > #include <linux/acpi.h>
> > +#include <linux/acpi_iort.h>
> > #include <linux/bitfield.h>
> > #include <linux/bitops.h>
> > #include <linux/cpuhotplug.h>
> > @@ -111,6 +112,7 @@ struct smmu_pmu {
> > struct device *dev;
> > void __iomem *reg_base;
> > void __iomem *reloc_base;
> > + u32 options;
> > u64 counter_present_mask;
> > u64 counter_mask;
> > };
> > @@ -224,12 +226,25 @@ static void smmu_pmu_set_period(struct
> smmu_pmu *smmu_pmu,
> > u32 idx = hwc->idx;
> > u64 new;
> >
> > - /*
> > - * We limit the max period to half the max counter value of the counter
> > - * size, so that even in the case of extreme interrupt latency the
> > - * counter will (hopefully) not wrap past its initial value.
> > - */
> > - new = smmu_pmu->counter_mask >> 1;
> > + if (smmu_pmu->options & IORT_PMCG_EVCNTR_RDONLY) {
> > + /*
> > + * On platforms that require this quirk, if the counter starts
> > + * at < half_counter value and wraps, the current logic of
> > + * handling the overflow may not work. It is expected that,
> > + * those platforms will have full 64 counter bits implemented
> > + * so that such a possibility is remote(eg: HiSilicon HIP08).
> > + */
> > + new = smmu_pmu_counter_get_value(smmu_pmu, idx);
> > + } else {
> > + /*
> > + * We limit the max period to half the max counter value
> > + * of the counter size, so that even in the case of extreme
> > + * interrupt latency the counter will (hopefully) not wrap
> > + * past its initial value.
> > + */
> > + new = smmu_pmu->counter_mask >> 1;
> > + smmu_pmu_counter_set_value(smmu_pmu, idx, new);
> > + }
> >
> > local64_set(&hwc->prev_count, new);
> > smmu_pmu_counter_set_value(smmu_pmu, idx, new);
>
> Either we've just done this already, or it's not going to have any
> effect anyway, so it can definitely go.

My bad. Forgot to remove that. v4 didn’t have this here.

Thanks,
Shameer

> Robin.
>
> > @@ -670,6 +685,12 @@ static void smmu_pmu_reset(struct smmu_pmu
> *smmu_pmu)
> > smmu_pmu->reloc_base + SMMU_PMCG_OVSCLR0);
> > }
> >
> > +static void smmu_pmu_get_acpi_options(struct smmu_pmu *smmu_pmu)
> > +{
> > + smmu_pmu->options = *(u32 *)dev_get_platdata(smmu_pmu->dev);
> > + dev_notice(smmu_pmu->dev, "option mask 0x%x\n",
> smmu_pmu->options);
> > +}
> > +
> > static int smmu_pmu_probe(struct platform_device *pdev)
> > {
> > struct smmu_pmu *smmu_pmu;
> > @@ -749,6 +770,8 @@ static int smmu_pmu_probe(struct platform_device
> *pdev)
> > return -EINVAL;
> > }
> >
> > + smmu_pmu_get_acpi_options(smmu_pmu);
> > +
> > /* Pick one CPU to be the preferred one to use */
> > smmu_pmu->on_cpu = get_cpu();
> > WARN_ON(irq_set_affinity(smmu_pmu->irq,
> cpumask_of(smmu_pmu->on_cpu)));
> > diff --git a/include/linux/acpi_iort.h b/include/linux/acpi_iort.h
> > index 38cd77b..4a7ae69 100644
> > --- a/include/linux/acpi_iort.h
> > +++ b/include/linux/acpi_iort.h
> > @@ -26,6 +26,9 @@
> > #define IORT_IRQ_MASK(irq) (irq & 0xffffffffULL)
> > #define IORT_IRQ_TRIGGER_MASK(irq) ((irq >> 32) & 0xffffffffULL)
> >
> > +/* PMCG node option or quirk flags */
> > +#define IORT_PMCG_EVCNTR_RDONLY (1 << 0)
> > +
> > int iort_register_domain_token(int trans_id, phys_addr_t base,
> > struct fwnode_handle *fw_node);
> > void iort_deregister_domain_token(int trans_id);
> >
\
 
 \ /
  Last update: 2019-01-28 10:25    [W:0.079 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site