lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5] irqchip/mmp: only touch the PJ4 & FIQ bits on enable/disable
From
Date
I guess the subject is supposed to read: "only touch the PJ4 *IRQ* & FIQ
bits on enable/disable", right?

If that's the case, let me know, and I'll fix it up when applying it.

On 28/01/2019 15:59, Lubomir Rintel wrote:
> Resetting the bit 4 disables the interrupt delivery to the "secure
> processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
> where the firmware running on the "secure processor" bit-bangs the
> PS/2 protocol over the GPIO lines.
>
> It is not clear what the rest of the bits are and Marvel was unhelpful
> when asked for documentation. Aside from the SP bit, there are probably
> priority bits.
>
> Leaving the unknown bits as the firmware set them up seems to be a wiser
> course of action compared to just turning them off.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Acked-by: Pavel Machek <pavel@ucw.cz>
>
> ---
> Changes since v4:
> - Remove unused ICU_INT_ROUTE_SP_IRQ define
> - Try to further clarify the commit message
>
> Changes since v3:
> - Use #defined instead of integer literals
>
> Changes since v2:
> - Correct subsystem maintainers on Cc (irqchip)
>
> Changes since v1:
> - Adjusted wording & ack from Pavel
> ---
> drivers/irqchip/irq-mmp.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
> index 37a54797a137..fac8f1365f76 100644
> --- a/drivers/irqchip/irq-mmp.c
> +++ b/drivers/irqchip/irq-mmp.c
> @@ -34,6 +34,9 @@
> #define SEL_INT_PENDING (1 << 6)
> #define SEL_INT_NUM_MASK 0x3f
>
> +#define MMP2_ICU_INT_ROUTE_PJ4_IRQ (1 << 5)
> +#define MMP2_ICU_INT_ROUTE_PJ4_FIQ (1 << 6)
> +
> struct icu_chip_data {
> int nr_irqs;
> unsigned int virq_base;
> @@ -190,7 +193,8 @@ static const struct mmp_intc_conf mmp_conf = {
> static const struct mmp_intc_conf mmp2_conf = {
> .conf_enable = 0x20,
> .conf_disable = 0x0,
> - .conf_mask = 0x7f,
> + .conf_mask = MMP2_ICU_INT_ROUTE_PJ4_IRQ |
> + MMP2_ICU_INT_ROUTE_PJ4_FIQ,
> };
>
> static void __exception_irq_entry mmp_handle_irq(struct pt_regs *regs)
>

Thanks,

M.
--
Jazz is not dead. It just smells funny...

\
 
 \ /
  Last update: 2019-01-28 19:35    [W:0.065 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site