lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 1/6] dt-bindings: timer: add Tegra210 timer
Date
The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
(TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic,
or watchdog interrupts.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v2:
* list all the interrupts that are supported by tegra210 timers block
* add RB tag from Rob.
---
.../bindings/timer/nvidia,tegra210-timer.txt | 36 +++++++++++++++++++
1 file changed, 36 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt

diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
new file mode 100644
index 000000000000..032cda96fe0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt
@@ -0,0 +1,36 @@
+NVIDIA Tegra210 timer
+
+The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit
+timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived
+from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock
+(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic,
+or watchdog interrupts.
+
+Required properties:
+- compatible : "nvidia,tegra210-timer".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 14 interrupts; one per each timer channels 0 through
+ 13.
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+
+timer@60005000 {
+ compatible = "nvidia,tegra210-timer";
+ reg = <0x0 0x60005000 0x0 0x400>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_TIMER>;
+ clock-names = "timer";
+};
--
2.20.1
\
 
 \ /
  Last update: 2019-01-28 10:19    [W:0.028 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site