lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.19 106/258] usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
Date
From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ]

Fix the issue: device doesn't accept LGO_U1/U2:
1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2
by default;
2. enable/disable controller to initiate requests for transition into
U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE;

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/usb/mtu3/mtu3_core.c | 4 +++-
drivers/usb/mtu3/mtu3_gadget_ep0.c | 8 ++++----
2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index d045d8458f81..48d10a61e271 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -578,8 +578,10 @@ static void mtu3_regs_init(struct mtu3 *mtu)
if (mtu->is_u3_ip) {
/* disable LGO_U1/U2 by default */
mtu3_clrbits(mbase, U3D_LINK_POWER_CONTROL,
- SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE |
SW_U1_REQUEST_ENABLE | SW_U2_REQUEST_ENABLE);
+ /* enable accept LGO_U1/U2 link command from host */
+ mtu3_setbits(mbase, U3D_LINK_POWER_CONTROL,
+ SW_U1_ACCEPT_ENABLE | SW_U2_ACCEPT_ENABLE);
/* device responses to u3_exit from host automatically */
mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN);
/* automatically build U2 link when U3 detect fail */
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 25216e79cd6e..3c464d8ae023 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -336,9 +336,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,

lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
- lpc |= SW_U1_ACCEPT_ENABLE;
+ lpc |= SW_U1_REQUEST_ENABLE;
else
- lpc &= ~SW_U1_ACCEPT_ENABLE;
+ lpc &= ~SW_U1_REQUEST_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);

mtu->u1_enable = !!set;
@@ -351,9 +351,9 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,

lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
if (set)
- lpc |= SW_U2_ACCEPT_ENABLE;
+ lpc |= SW_U2_REQUEST_ENABLE;
else
- lpc &= ~SW_U2_ACCEPT_ENABLE;
+ lpc &= ~SW_U2_REQUEST_ENABLE;
mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);

mtu->u2_enable = !!set;
--
2.19.1
\
 
 \ /
  Last update: 2019-01-28 18:21    [W:0.772 / U:1.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site