lkml.org 
[lkml]   [2019]   [Jan]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] drm: panel: Add Samsung s6e63m0 panel documentation
Hi Pawel.

Thanks for the patch, some comments follows.
Please judge what comments you chose to follow, see this as suggestions.

According to Documentation/devicetree/bindings/submitting-patches.rst:

The preferred subject prefix for binding patches is:
"dt-bindings: <binding dir>: ..."

It would be a good idea to follow this practice in next revision.

On Fri, Jan 25, 2019 at 05:46:44PM +0100, Paweł Chmiel wrote:
> From: Jonathan Bakker <xc-racer2@live.ca>
>
> This commit adds documentation for Samsung s6e63m0 AMOLED LCD panel
> driver.
>
> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
> ---
> .../display/panel/samsung,s6e63m0.txt | 60 +++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
> new file mode 100644
> index 000000000000..4979200e2dd2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.txt
> @@ -0,0 +1,60 @@
> +Samsung s6e63m0 AMOLED LCD panel
> +
> +Required properties:
> + - compatible: "samsung,s6e63m0"
> + - reset-gpio: GPIO spec for reset pin
The preferred name is reset-gpios (added 's')

> + - vdd3-supply: VDD regulator
> + - vci-supply: VCI regulator
> + - display-timings: timings for the connected panel as described by [1]
Today, as is my best understanding, it is encouraged to specify the timing
in the actual driver and not in DT,

The example include a spi-max-frequency which is not mentioned?

> +
> +Optional properties:
> + - reset-delay: Delay in ms after adjusting reset-gpio, default 120ms
> + - power-on-delay: Delay in ms after powering on, default 25ms
> + - power-off-delay: Delay in ms before powering off, default 200ms
> + - panel-width-mm: physical panel width in mm
> + - panel-height-mm: physical panel height in mm
Likewise these delays are also properties that today are included in the driver.

I cannot explain the background for this, this is just how things are done.

> +
> +The device node can contain one 'port' child node with one child
> +'endpoint' node, according to the bindings defined in [2]. This
> +node should describe panel's video bus.
> +
> +[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
> +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
> +
> +Example:
> +
> + s6e63m0: display@0 {
> + compatible = "samsung,s6e63m0";
> + reg = <0>;
> + reset-gpio = <&mp05 5 1>;
> + vdd3-supply = <&ldo12_reg>;
> + vci-supply = <&ldo11_reg>;
> + spi-max-frequency = <1000000>;
> +
> + power-on-delay = <0>;
> + power-off-delay = <0>;
> + reset-delay = <10>;
> + panel-width-mm = <53>;
> + panel-height-mm = <89>;
> +
> + display-timings {
> + timing-0 {
> + /* 480x800@60Hz */
> + clock-frequency = <25628040>;
> + hactive = <480>;
> + vactive = <800>;
> + hfront-porch = <16>;
> + hback-porch = <16>;
> + hsync-len = <2>;
> + vfront-porch = <28>;
> + vback-porch = <1>;
> + vsync-len = <2>;
> + };
> + };
> +
> + port {
> + lcd_ep: endpoint {
> + remote-endpoint = <&fimd_ep>;
> + };
> + };
> + };

Sam

\
 
 \ /
  Last update: 2019-01-26 21:56    [W:0.092 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site