lkml.org 
[lkml]   [2019]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v10 1/4] media: Media Device Allocator API
From
Date
Hi Sakari,

On 1/25/19 8:38 AM, Sakari Ailus wrote:
> Hi Shuah,
>
> On Thu, Jan 24, 2019 at 01:32:38PM -0700, Shuah Khan wrote:
>> Media Device Allocator API to allows multiple drivers share a media device.
>> This API solves a very common use-case for media devices where one physical
>> device (an USB stick) provides both audio and video. When such media device
>> exposes a standard USB Audio class, a proprietary Video class, two or more
>> independent drivers will share a single physical USB bridge. In such cases,
>> it is necessary to coordinate access to the shared resource.
>>
>> Using this API, drivers can allocate a media device with the shared struct
>> device as the key. Once the media device is allocated by a driver, other
>> drivers can get a reference to it. The media device is released when all
>> the references are released.
>
> Are there real, non-USB devices that could use the same API?
>

There might be. I don't have any to test. This patch is restricted
to USB at the moment.

>>
>> Signed-off-by: Shuah Khan <shuah@kernel.org>
>> ---
>> Documentation/media/kapi/mc-core.rst | 41 ++++++++
>> drivers/media/Makefile | 4 +
>> drivers/media/media-dev-allocator.c | 144 +++++++++++++++++++++++++++
>> include/media/media-dev-allocator.h | 53 ++++++++++
>> 4 files changed, 242 insertions(+)
>> create mode 100644 drivers/media/media-dev-allocator.c
>> create mode 100644 include/media/media-dev-allocator.h
>>
>> diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
>> index 0bcfeadbc52d..07f2a6a90af2 100644
>> --- a/Documentation/media/kapi/mc-core.rst
>> +++ b/Documentation/media/kapi/mc-core.rst
>> @@ -259,6 +259,45 @@ Subsystems should facilitate link validation by providing subsystem specific
>> helper functions to provide easy access for commonly needed information, and
>> in the end provide a way to use driver-specific callbacks.
>>
>> +Media Controller Device Allocator API
>> +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> +
>> +When the media device belongs to more than one driver, the shared media
>> +device is allocated with the shared struct device as the key for look ups.
>> +
>> +The shared media device should stay in registered state until the last
>> +driver unregisters it. In addition, the media device should be released when
>> +all the references are released. Each driver gets a reference to the media
>> +device during probe, when it allocates the media device. If media device is
>> +already allocated, the allocate API bumps up the refcount and returns the
>> +existing media device. The driver puts the reference back in its disconnect
>> +routine when it calls :c:func:`media_device_delete()`.
>> +
>> +The media device is unregistered and cleaned up from the kref put handler to
>> +ensure that the media device stays in registered state until the last driver
>> +unregisters the media device.
>> +
>> +**Driver Usage**
>> +
>> +Drivers should use the appropriate media-core routines to manage the shared
>> +media device life-time handling the two states:
>> +1. allocate -> register -> delete
>> +2. get reference to already registered device -> delete
>> +
>> +call :c:func:`media_device_delete()` routine to make sure the shared media
>> +device delete is handled correctly.
>> +
>> +**driver probe:**
>> +Call :c:func:`media_device_usb_allocate()` to allocate or get a reference
>> +Call :c:func:`media_device_register()`, if media devnode isn't registered
>> +
>> +**driver disconnect:**
>> +Call :c:func:`media_device_delete()` to free the media_device. Freeing is
>> +handled by the kref put handler.
>> +
>> +API Definitions
>> +^^^^^^^^^^^^^^^
>> +
>> .. kernel-doc:: include/media/media-device.h
>>
>> .. kernel-doc:: include/media/media-devnode.h
>> @@ -266,3 +305,5 @@ in the end provide a way to use driver-specific callbacks.
>> .. kernel-doc:: include/media/media-entity.h
>>
>> .. kernel-doc:: include/media/media-request.h
>> +
>> +.. kernel-doc:: include/media/media-dev-allocator.h
>> diff --git a/drivers/media/Makefile b/drivers/media/Makefile
>> index 985d35ec6b29..1d7653318af6 100644
>> --- a/drivers/media/Makefile
>> +++ b/drivers/media/Makefile
>> @@ -6,6 +6,10 @@
>> media-objs := media-device.o media-devnode.o media-entity.o \
>> media-request.o
>>
>> +ifeq ($(CONFIG_USB),y)
>> + media-objs += media-dev-allocator.o
>> +endif
>> +
>> #
>> # I2C drivers should come before other drivers, otherwise they'll fail
>> # when compiled as builtin drivers
>> diff --git a/drivers/media/media-dev-allocator.c b/drivers/media/media-dev-allocator.c
>> new file mode 100644
>> index 000000000000..4606456c1e86
>> --- /dev/null
>> +++ b/drivers/media/media-dev-allocator.c
>> @@ -0,0 +1,144 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>
> GPL-2.0+
>

I would like to address this in a follow-on patch instead of
re-doing the series again. Hope that is okay.

>> +/*
>> + * media-dev-allocator.c - Media Controller Device Allocator API
>> + *
>> + * Copyright (c) 2018 Shuah Khan <shuah@kernel.org>
>> + *
>> + * Credits: Suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>> + */
>> +
>> +/*
>> + * This file adds a global refcounted Media Controller Device Instance API.
>> + * A system wide global media device list is managed and each media device
>> + * includes a kref count. The last put on the media device releases the media
>> + * device instance.
>> + *
>> + */
>> +
>> +#include <linux/kref.h>
>> +#include <linux/module.h>
>> +#include <linux/slab.h>
>> +#include <linux/usb.h>
>> +
>> +#include <media/media-device.h>
>> +
>> +static LIST_HEAD(media_device_list);
>> +static DEFINE_MUTEX(media_device_lock);
>> +
>> +struct media_device_instance {
>> + struct media_device mdev;
>> + struct module *owner;
>> + struct list_head list;
>> + struct kref refcount;
>> +};
>> +
>> +static inline struct media_device_instance *
>> +to_media_device_instance(struct media_device *mdev)
>> +{
>> + return container_of(mdev, struct media_device_instance, mdev);
>> +}
>> +
>> +static void media_device_instance_release(struct kref *kref)
>> +{
>> + struct media_device_instance *mdi =
>> + container_of(kref, struct media_device_instance, refcount);
>> +
>> + dev_dbg(mdi->mdev.dev, "%s: mdev=%p\n", __func__, &mdi->mdev);
>> +
>> + mutex_lock(&media_device_lock);
>> +
>> + media_device_unregister(&mdi->mdev);
>> + media_device_cleanup(&mdi->mdev);
>
> This is a problem, albeit not really more of a problem than it is in a
> driver.

Okay good to know that it can be addressed in your media device
refcounting series.

The refcounting changes can be made here instead. I'll take this
> into account in the media device refcounting series I'm planning to start
> working on again; would you be perhaps able to help testing with this
> device once I have patches in that shape? I have no access to the hardware.
>

Absolutely. I will be happy to help you with testing on the same
hardware, I used for this series.

>> +
>> + list_del(&mdi->list);
>> + mutex_unlock(&media_device_lock);
>> +
>> + kfree(mdi);
>> +}
>> +
>> +/* Callers should hold media_device_lock when calling this function */
>> +static struct media_device *__media_device_get(struct device *dev,
>> + const char *module_name,
>> + struct module *modp)
>> +{
>> + struct media_device_instance *mdi;
>> +
>> + list_for_each_entry(mdi, &media_device_list, list) {
>> +
>> + if (mdi->mdev.dev != dev)
>> + continue;
>> +
>> + kref_get(&mdi->refcount);
>> +
>> + /* get module reference for the media_device owner */
>> + if (modp != mdi->owner && !try_module_get(mdi->owner))
>> + dev_err(dev, "%s: try_module_get() error\n", __func__);
>> + dev_dbg(dev, "%s: get mdev=%p module_name %s\n",
>> + __func__, &mdi->mdev, module_name);
>> + return &mdi->mdev;
>> + }
>> +
>> + mdi = kzalloc(sizeof(*mdi), GFP_KERNEL);
>> + if (!mdi)
>> + return NULL;
>> +
>> + mdi->owner = modp;
>> + kref_init(&mdi->refcount);
>> + list_add_tail(&mdi->list, &media_device_list);
>> +
>> + dev_dbg(dev, "%s: alloc mdev=%p module_name %s\n", __func__,
>> + &mdi->mdev, module_name);
>> + return &mdi->mdev;
>> +}
>> +
>> +#if IS_ENABLED(CONFIG_USB)
>
> You already compile the file only if CONFIG_USB is enabled. I think you
> could remove this.
>
>> +struct media_device *media_device_usb_allocate(struct usb_device *udev,
>> + const char *module_name)
>
> I'd like to suggest working based on usb_interface instead of usb_device
> here: that object already exists and you can find out the device based on
> it. It seems all callers of this function already have the usb_interface
> around.
>

Is there an advantage to using interface instead of the parent device?
Is there a problem doing it this way?


>> +{
>> + struct media_device *mdev;
>> + struct module *modptr;
>> +
>> + mutex_lock(&module_mutex);
>> + modptr = find_module(module_name);
>> + mutex_unlock(&module_mutex);
>> +
>> + mutex_lock(&media_device_lock);
>> + mdev = __media_device_get(&udev->dev, module_name, modptr);
>> + if (!mdev) {
>> + mutex_unlock(&media_device_lock);
>> + return ERR_PTR(-ENOMEM);
>> + }
>> +
>> + /* check if media device is already initialized */
>> + if (!mdev->dev)
>> + __media_device_usb_init(mdev, udev, udev->product,
>> + module_name);
>> + mutex_unlock(&media_device_lock);
>> + return mdev;
>> +}
>> +EXPORT_SYMBOL_GPL(media_device_usb_allocate);
>> +#endif
>> +
>> +void media_device_delete(struct media_device *mdev, const char *module_name)
>
> Same here. The use of the module name seems a bit hackish to me, albeit I
> suppose it'd work, too.
>

What is hackish about it? I found it very useful to use it in debug and
error messages that are user-friendly.

thanks,
-- Shuah

\
 
 \ /
  Last update: 2019-01-26 01:27    [W:0.091 / U:0.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site