lkml.org 
[lkml]   [2019]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC] Provide in-kernel headers for making it easy to extend the kernel
On Fri, Jan 25, 2019 at 12:28 PM <hpa@zytor.com> wrote:
>
> On January 25, 2019 11:15:52 AM PST, Daniel Colascione <dancol@google.com> wrote:
> >On Fri, Jan 25, 2019 at 11:01 AM <hpa@zytor.com> wrote:
> >>
> >> On January 24, 2019 12:59:29 PM PST, Joel Fernandes
> ><joel@joelfernandes.org> wrote:
> >> >On Thu, Jan 24, 2019 at 07:57:26PM +0100, Karim Yaghmour wrote:
> >> >>
> >> >> On 1/23/19 11:37 PM, Daniel Colascione wrote:
> >> >[..]
> >> >> > > Personally I advocated a more aggressive approach with Joel in
> >> >private:
> >> >> > > just put the darn headers straight into the kernel image, it's
> >> >the
> >> >> > > *only* artifact we're sure will follow the Android device
> >> >whatever
> >> >> > > happens to it (like built-in ftrace).
> >> >> >
> >> >> > I was thinking along similar lines. Ordinarily, we make loadable
> >> >> > kernel modules. What we kind of want here is a non-loadable
> >kernel
> >> >> > module --- or a non-loadable section in the kernel image proper.
> >> >I'm
> >> >> > not familiar with early-stage kernel loader operation: I know
> >it's
> >> >> > possible to crease discardable sections in the kernel image, but
> >> >can
> >> >> > we create sections that are never slurped into memory in the
> >first
> >> >> > place? If not, maybe loading and immediately discarding the
> >header
> >> >> > section is good enough.
> >> >>
> >> >> Interesting. Maybe just append it to the image but have it not
> >loaded
> >> >and
> >> >> have a kernel parameter than enables a "/proc/kheaders" driver to
> >> >know where
> >> >> the fetch the appended headers from storage at runtime. There
> >would
> >> >be no
> >> >> RAM loading whatsoever of the headers, just some sort of
> >> >> "kheaders=/dev/foobar:offset:size" parameter. If you turn the
> >option
> >> >on, you
> >> >> get a fatter kernel image size to store on permanent storage, but
> >no
> >> >impact
> >> >> on what's loaded at boot time.
> >> >
> >> >Embedding anything into the kernel image does impact boot time
> >though
> >> >because
> >> >it increase the time spent by bootloader. A module OTOH would not
> >have
> >> >such
> >> >overhead.
> >> >
> >> >Also a kernel can be booted in any number of ways other than mass
> >> >storage so
> >> >it is not a generic Linux-wide solution to have a kheaders= option
> >like
> >> >that.
> >> >If the option is forgotten, then the running system can't use the
> >> >feature.
> >> >The other issue is it requires a kernel command line option /
> >> >bootloader
> >> >changes for that which adds more configuration burden, which not be
> >> >needed
> >> >with a module.
> >> >
> >> >> > Would such a thing really do better than LZMA? LZMA already has
> >> >very
> >> >> > clever techniques for eliminating long-range redundancies in
> >> >> > compressible text, including redundancies at the sub-byte level.
> >I
> >> >can
> >> >> > certainly understand the benefit of stripping comments, since
> >> >removing
> >> >> > comments really does decrease the total amount of information
> >the
> >> >> > compressor has to preserve, but I'm not sure how much the
> >encoding
> >> >> > scheme you propose below would help, since it reminds me of the
> >> >> > encoding scheme that LZMA would discover automatically.
> >> >>
> >> >> I'm no compression algorithm expert. If you say LZMA would do the
> >> >> same/better than what I suggested then I have no reason to contest
> >> >that. My
> >> >> goal is to see the headers as part of the kernel image that's
> >> >distributed on
> >> >> devices so that they don't have to be chased around. I'm just
> >trying
> >> >to make
> >> >> it as palatable as possible.
> >> >
> >> >I believe LZMA is really good at that sort of thing too.
> >> >
> >> >Also at 3.3MB of module size, I think we are really good size-wise.
> >But
> >> >Dan
> >> >is helping look at possibly reducing further if he gets time. Many
> >> >modules in
> >> >my experience are much bigger. amdgpu.ko on my Linux machine is
> >6.1MB.
> >> >
> >> >I really think making it a module is the best way to make sure this
> >is
> >> >bundled with the kernel on the widest number of Android and other
> >Linux
> >> >systems, without incurring boot time overhead, or any other command
> >> >line
> >> >configuration burden.
> >> >
> >> >I spoke to so many people at LPC personally with other kernel
> >> >contributors,
> >> >and many folks told me one word - MODULE :D. Even though I
> >hesitated
> >> >at
> >> >first, now it seems the right solution.
> >> >
> >> >If no one seriously objects, I'll clean this up and post a v2 and
> >with
> >> >the
> >> >RFC tag taken off. Thank you!
> >> >
> >> > - Joel
> >>
> >> So let me throw in a different notion.
> >>
> >> A kernel module really is nothing other than a kernel build system
> >artifact stored in the filesystem.
> >>
> >> I really don't at any reason whatsoever why this is direct from just
> >producing an archive and putting it in the module directory, except
> >that the latter is far simpler.
> >>
> >> I see literally *no* problem, social or technical, you are solvin by
> >actually making it a kernel ELF object.
> >
> >Joel does have a point. Suppose we're on Android and we're testing a
> >random local kernel we've built. We can command the device to boot
> >into the bootloader, then send our locally-built kernel to the device
> >with "fastboot boot mykernelz". Having booted the device this way,
> >there's no on-disk artifact corresponding to mykernelz: we just sent
> >the boot kernel directly to the device's memory. Now, suppose I want
> >to attach DCTV or some other fancy ftrace-based analysis tool to the
> >device in order to study how mykernelz acts in some scenario I care
> >about. With Joel's approach, DCTV would be able to grab the kernel
> >headers from the running kernel, compile whatever kprobe or BPF
> >incantations needed, and have everything Just Work. If we put the
> >headers only on disk without any way to retrieve them at runtime, we'd
> >need a different path for kernel self-description in the case where a
> >running kernel doesn't have an on-disk representation, and that adds a
> >lot of complexity for everyone everywhere. By providing
> >guaranteed-correct kernel headers via some runtime interface, we make
> >a lot of things Just Work, and that has value.
>
> Joel specifically is talking about using a module, which *does* have to be in the filesystem.
>
> You can't have it both ways, unfortunately.

In general, whatever we support in module form, we also support as
part of the kernel image itself.

\
 
 \ /
  Last update: 2019-01-25 21:36    [W:0.106 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site