lkml.org 
[lkml]   [2019]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: zcu100-revC: Give wifi some time after power-on
Date
From: Jan Kiszka <jan.kiszka@siemens.com>

Somewhere along recent changes to power control of the wl1835, power-on
became very unreliable on the hikey, failing like this:

wl1271_sdio: probe of mmc2:0001:1 failed with error -16
wl1271_sdio: probe of mmc2:0001:2 failed with error -16

After playing with some dt parameters and comparing to other users of
this chip, it turned out we need some power-on delay to make things
stable again. In contrast to those other users which define 200 ms,
Ultra96 is already happy with 10 ms.

Fixes: ea452678734e ("arm64: dts: hikey: Fix WiFi support")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
---
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 13a0a028df98..e5699d0d91e4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -101,6 +101,7 @@
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+ post-power-on-delay-ms = <10>;
};
};

--
2.16.4
\
 
 \ /
  Last update: 2019-01-24 08:55    [W:0.038 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site