lkml.org 
[lkml]   [2019]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
Date
On 23.01.2019 18:33, Codrin Ciubotariu - M19940 wrote:
> From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>
> atchan->status variable is used to store two different information:
> - pass channel interrupts status from interrupt handler to tasklet;
> - channel information like whether it is cyclic or paused;
>
> This causes a bug when device_terminate_all() is called,
> (AT_XDMAC_CHAN_IS_CYCLIC cleared on atchan->status) and then a late End
> of Block interrupt arrives (AT_XDMAC_CIS_BIS), which sets bit 0 of
> atchan->status. Bit 0 is also used for AT_XDMAC_CHAN_IS_CYCLIC, so when
> a new descriptor for a cyclic transfer is created, the driver reports
> the channel as in use:
>
> if (test_and_set_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status)) {
> dev_err(chan2dev(chan), "channel currently used\n");
> return NULL;
> }
>
> This patch fixes the bug by adding a different struct member to keep
> the interrupts status separated from the channel status bits.
>
> Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
> ---

Forgot to add:

Changes in v2:
- changed commit message;

If you need v3 for this let me know.

Best regards,
Codrin

\
 
 \ /
  Last update: 2019-01-23 17:41    [W:0.049 / U:0.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site