lkml.org 
[lkml]   [2019]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next V4 5/5] vhost: access vq metadata through kernel virtual address
On Thu, Jan 24, 2019 at 12:11:28PM +0800, Jason Wang wrote:
>
> On 2019/1/24 下午12:07, Jason Wang wrote:
> >
> > On 2019/1/23 下午10:08, Michael S. Tsirkin wrote:
> > > On Wed, Jan 23, 2019 at 05:55:57PM +0800, Jason Wang wrote:
> > > > It was noticed that the copy_user() friends that was used to access
> > > > virtqueue metdata tends to be very expensive for dataplane
> > > > implementation like vhost since it involves lots of software checks,
> > > > speculation barrier, hardware feature toggling (e.g SMAP). The
> > > > extra cost will be more obvious when transferring small packets since
> > > > the time spent on metadata accessing become more significant.
> > > >
> > > > This patch tries to eliminate those overheads by accessing them
> > > > through kernel virtual address by vmap(). To make the pages can be
> > > > migrated, instead of pinning them through GUP, we use MMU notifiers to
> > > > invalidate vmaps and re-establish vmaps during each round of metadata
> > > > prefetching if necessary. For devices that doesn't use metadata
> > > > prefetching, the memory accessors fallback to normal copy_user()
> > > > implementation gracefully. The invalidation was synchronized with
> > > > datapath through vq mutex, and in order to avoid hold vq mutex during
> > > > range checking, MMU notifier was teared down when trying to modify vq
> > > > metadata.
> > > >
> > > > Another thing is kernel lacks efficient solution for tracking dirty
> > > > pages by vmap(), this will lead issues if vhost is using file backed
> > > > memory which needs care of writeback. This patch solves this issue by
> > > > just skipping the vma that is file backed and fallback to normal
> > > > copy_user() friends. This might introduce some overheads for file
> > > > backed users but consider this use case is rare we could do
> > > > optimizations on top.
> > > >
> > > > Note that this was only done when device IOTLB is not enabled. We
> > > > could use similar method to optimize it in the future.
> > > >
> > > > Tests shows at most about 22% improvement on TX PPS when using
> > > > virtio-user + vhost_net + xdp1 + TAP on 2.6GHz Broadwell:
> > > >
> > > >          SMAP on | SMAP off
> > > > Before: 5.0Mpps | 6.6Mpps
> > > > After:  6.1Mpps | 7.4Mpps
> > > >
> > > > Signed-off-by: Jason Wang <jasowang@redhat.com>
> > >
> > > So this is the bulk of the change.
> > > Threee things that I need to look into
> > > - Are there any security issues with bypassing the speculation barrier
> > >    that is normally present after access_ok?
> >
> >
> > If we can make sure the bypassing was only used in a kthread (vhost), it
> > should be fine I think.
> >
> >
> > > - How hard does the special handling for
> > >    file backed storage make testing?
> >
> >
> > It's as simple as un-commenting vhost_can_vmap()? Or I can try to hack
> > qemu or dpdk to test this.
> >
> >
> > >    On the one hand we could add a module parameter to
> > >    force copy to/from user. on the other that's
> > >    another configuration we need to support.
> >
> >
> > That sounds sub-optimal since it leave the choice to users.
> >
> >
> > >    But iotlb is not using vmap, so maybe that's enough
> > >    for testing.
> > > - How hard is it to figure out which mode uses which code.
>
>
> It's as simple as tracing __get_user() usage in vhost process?
>
> Thanks

Well there are now mtu notifiers etc etc. It's hardly as well
contained as that.


>
> > >
> > >
> > >
> > > Meanwhile, could you pls post data comparing this last patch with the
> > > below?  This removes the speculation barrier replacing it with a
> > > (useless but at least more lightweight) data dependency.
> >
> >
> > SMAP off
> >
> > Your patch: 7.2MPPs
> >
> > vmap: 7.4Mpps
> >
> > I don't test SMAP on, since it will be much slow for sure.
> >
> > Thanks
> >
> >
> > >
> > > Thanks!
> > >
> > >
> > > diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> > > index bac939af8dbb..352ee7e14476 100644
> > > --- a/drivers/vhost/vhost.c
> > > +++ b/drivers/vhost/vhost.c
> > > @@ -739,7 +739,7 @@ static int vhost_copy_to_user(struct
> > > vhost_virtqueue *vq, void __user *to,
> > >       int ret;
> > >         if (!vq->iotlb)
> > > -        return __copy_to_user(to, from, size);
> > > +        return copy_to_user(to, from, size);
> > >       else {
> > >           /* This function should be called after iotlb
> > >            * prefetch, which means we're sure that all vq
> > > @@ -752,7 +752,7 @@ static int vhost_copy_to_user(struct
> > > vhost_virtqueue *vq, void __user *to,
> > >                        VHOST_ADDR_USED);
> > >             if (uaddr)
> > > -            return __copy_to_user(uaddr, from, size);
> > > +            return copy_to_user(uaddr, from, size);
> > >             ret = translate_desc(vq, (u64)(uintptr_t)to, size,
> > > vq->iotlb_iov,
> > >                        ARRAY_SIZE(vq->iotlb_iov),
> > > @@ -774,7 +774,7 @@ static int vhost_copy_from_user(struct
> > > vhost_virtqueue *vq, void *to,
> > >       int ret;
> > >         if (!vq->iotlb)
> > > -        return __copy_from_user(to, from, size);
> > > +        return copy_from_user(to, from, size);
> > >       else {
> > >           /* This function should be called after iotlb
> > >            * prefetch, which means we're sure that vq
> > > @@ -787,7 +787,7 @@ static int vhost_copy_from_user(struct
> > > vhost_virtqueue *vq, void *to,
> > >           struct iov_iter f;
> > >             if (uaddr)
> > > -            return __copy_from_user(to, uaddr, size);
> > > +            return copy_from_user(to, uaddr, size);
> > >             ret = translate_desc(vq, (u64)(uintptr_t)from, size,
> > > vq->iotlb_iov,
> > >                        ARRAY_SIZE(vq->iotlb_iov),
> > > @@ -855,13 +855,13 @@ static inline void __user
> > > *__vhost_get_user(struct vhost_virtqueue *vq,
> > >   ({ \
> > >       int ret = -EFAULT; \
> > >       if (!vq->iotlb) { \
> > > -        ret = __put_user(x, ptr); \
> > > +        ret = put_user(x, ptr); \
> > >       } else { \
> > >           __typeof__(ptr) to = \
> > >               (__typeof__(ptr)) __vhost_get_user(vq, ptr,    \
> > >                         sizeof(*ptr), VHOST_ADDR_USED); \
> > >           if (to != NULL) \
> > > -            ret = __put_user(x, to); \
> > > +            ret = put_user(x, to); \
> > >           else \
> > >               ret = -EFAULT;    \
> > >       } \
> > > @@ -872,14 +872,14 @@ static inline void __user
> > > *__vhost_get_user(struct vhost_virtqueue *vq,
> > >   ({ \
> > >       int ret; \
> > >       if (!vq->iotlb) { \
> > > -        ret = __get_user(x, ptr); \
> > > +        ret = get_user(x, ptr); \
> > >       } else { \
> > >           __typeof__(ptr) from = \
> > >               (__typeof__(ptr)) __vhost_get_user(vq, ptr, \
> > >                                  sizeof(*ptr), \
> > >                                  type); \
> > >           if (from != NULL) \
> > > -            ret = __get_user(x, from); \
> > > +            ret = get_user(x, from); \
> > >           else \
> > >               ret = -EFAULT; \
> > >       } \

\
 
 \ /
  Last update: 2019-01-24 05:55    [W:1.739 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site