lkml.org 
[lkml]   [2019]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] media: imx: csi: Disable SMFC before disabling IDMA channel
Philipp,

On Mon, Jan 21, 2019 at 12:49:10PM +0100, Philipp Zabel wrote:
> Hi,
>
> On Fri, 2019-01-18 at 17:04 -0800, Steve Longerbeam wrote:
> > Disable the SMFC before disabling the IDMA channel, instead of after,
> > in csi_idmac_unsetup().
> >
> > This fixes a complete system hard lockup on the SabreAuto when streaming
> > from the ADV7180, by repeatedly sending a stream off immediately followed
> > by stream on:
> >
> > while true; do v4l2-ctl -d4 --stream-mmap --stream-count=3; done
> >
> > Eventually this either causes the system lockup or EOF timeouts at all
> > subsequent stream on, until a system reset.
> >
> > The lockup occurs when disabling the IDMA channel at stream off. Stopping
> > the video data stream entering the IDMA channel before disabling the
> > channel itself appears to be a reliable fix for the hard lockup. That can
> > be done either by disabling the SMFC or the CSI before disabling the
> > channel. Disabling the SMFC before the channel is the easiest solution,
> > so do that.
> >
> > Fixes: 4a34ec8e470cb ("[media] media: imx: Add CSI subdev driver")
> >
> > Suggested-by: Peter Seiderer <ps.report@gmx.net>
> > Reported-by: Gaël PORTAY <gael.portay@collabora.com>
> > Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
>
> Gaël, could we get a Tested-by: for this as well?
>

I have tested the patchset v4 (not that one), and it has passed my test.

Regards,
Gael

\
 
 \ /
  Last update: 2019-01-22 16:14    [W:0.060 / U:8.620 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site