lkml.org 
[lkml]   [2019]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/fpu] x86/fpu: Get rid of CONFIG_AS_FXSAVEQ
Commit-ID:  bae54dc4f353653bbd3e3081754adad05da1d4dd
Gitweb: https://git.kernel.org/tip/bae54dc4f353653bbd3e3081754adad05da1d4dd
Author: Borislav Petkov <bp@suse.de>
AuthorDate: Fri, 18 Jan 2019 00:05:40 +0100
Committer: Borislav Petkov <bp@suse.de>
CommitDate: Tue, 22 Jan 2019 14:16:39 +0100

x86/fpu: Get rid of CONFIG_AS_FXSAVEQ

This was a "workaround" to probe for binutils which could generate
FXSAVEQ, apparently gas with min version 2.16. In the meantime, minimal
required gas version is 2.20 so all those workarounds for older binutils
can be dropped.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190117232408.GH5023@zn.tnic
---
arch/x86/Makefile | 1 -
arch/x86/include/asm/fpu/internal.h | 50 +++++--------------------------------
2 files changed, 6 insertions(+), 45 deletions(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 9c5a67d1b9c1..76bc4dc03d5e 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -187,7 +187,6 @@ cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,
cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1)

# does binutils support specific instructions?
-asinstr := $(call as-instr,fxsaveq (%rax),-DCONFIG_AS_FXSAVEQ=1)
asinstr += $(call as-instr,pshufb %xmm0$(comma)%xmm0,-DCONFIG_AS_SSSE3=1)
avx_instr := $(call as-instr,vxorps %ymm0$(comma)%ymm1$(comma)%ymm2,-DCONFIG_AS_AVX=1)
avx2_instr :=$(call as-instr,vpbroadcastb %xmm0$(comma)%ymm1,-DCONFIG_AS_AVX2=1)
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index fa2c93cb42a2..5d536e3dcc6d 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -137,37 +137,25 @@ static inline int copy_fxregs_to_user(struct fxregs_state __user *fx)
{
if (IS_ENABLED(CONFIG_X86_32))
return user_insn(fxsave %[fx], [fx] "=m" (*fx), "m" (*fx));
- else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+ else
return user_insn(fxsaveq %[fx], [fx] "=m" (*fx), "m" (*fx));

- /* See comment in copy_fxregs_to_kernel() below. */
- return user_insn(rex64/fxsave (%[fx]), "=m" (*fx), [fx] "R" (fx));
}

static inline void copy_kernel_to_fxregs(struct fxregs_state *fx)
{
- if (IS_ENABLED(CONFIG_X86_32)) {
+ if (IS_ENABLED(CONFIG_X86_32))
kernel_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
- } else {
- if (IS_ENABLED(CONFIG_AS_FXSAVEQ)) {
- kernel_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
- } else {
- /* See comment in copy_fxregs_to_kernel() below. */
- kernel_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx), "m" (*fx));
- }
- }
+ else
+ kernel_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
}

static inline int copy_user_to_fxregs(struct fxregs_state __user *fx)
{
if (IS_ENABLED(CONFIG_X86_32))
return user_insn(fxrstor %[fx], "=m" (*fx), [fx] "m" (*fx));
- else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+ else
return user_insn(fxrstorq %[fx], "=m" (*fx), [fx] "m" (*fx));
-
- /* See comment in copy_fxregs_to_kernel() below. */
- return user_insn(rex64/fxrstor (%[fx]), "=m" (*fx), [fx] "R" (fx),
- "m" (*fx));
}

static inline void copy_kernel_to_fregs(struct fregs_state *fx)
@@ -184,34 +172,8 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
{
if (IS_ENABLED(CONFIG_X86_32))
asm volatile( "fxsave %[fx]" : [fx] "=m" (fpu->state.fxsave));
- else if (IS_ENABLED(CONFIG_AS_FXSAVEQ))
+ else
asm volatile("fxsaveq %[fx]" : [fx] "=m" (fpu->state.fxsave));
- else {
- /* Using "rex64; fxsave %0" is broken because, if the memory
- * operand uses any extended registers for addressing, a second
- * REX prefix will be generated (to the assembler, rex64
- * followed by semicolon is a separate instruction), and hence
- * the 64-bitness is lost.
- *
- * Using "fxsaveq %0" would be the ideal choice, but is only
- * supported starting with gas 2.16.
- *
- * Using, as a workaround, the properly prefixed form below
- * isn't accepted by any binutils version so far released,
- * complaining that the same type of prefix is used twice if
- * an extended register is needed for addressing (fix submitted
- * to mainline 2005-11-21).
- *
- * asm volatile("rex64/fxsave %0" : "=m" (fpu->state.fxsave));
- *
- * This, however, we can work around by forcing the compiler to
- * select an addressing mode that doesn't require extended
- * registers.
- */
- asm volatile( "rex64/fxsave (%[fx])"
- : "=m" (fpu->state.fxsave)
- : [fx] "R" (&fpu->state.fxsave));
- }
}

/* These macros all use (%edi)/(%rdi) as the single memory argument. */
\
 
 \ /
  Last update: 2019-01-22 14:32    [W:0.055 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site