lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/4] hwrng: add OP-TEE based rng driver
On Mon, 21 Jan 2019 at 13:59, Sumit Garg <sumit.garg@linaro.org> wrote:
>
> On Mon, 21 Jan 2019 at 15:33, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote:
> >
> > On Mon, 21 Jan 2019 at 10:30, Sumit Garg <sumit.garg@linaro.org> wrote:
> > >
> > > On ARM SoC's with TrustZone enabled, peripherals like entropy sources
> > > might not be accessible to normal world (linux in this case) and rather
> > > accessible to secure world (OP-TEE in this case) only. So this driver
> > > aims to provides a generic interface to OP-TEE based random number
> > > generator service.
> > >
> > > This driver registers on TEE bus to interact with OP-TEE based rng
> > > device/service.
> > >
> > > Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
> > > ---
> > > MAINTAINERS | 5 +
> > > drivers/char/hw_random/Kconfig | 15 ++
> > > drivers/char/hw_random/Makefile | 1 +
> > > drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
> > > 4 files changed, 293 insertions(+)
> > > create mode 100644 drivers/char/hw_random/optee-rng.c
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index 32d44447..502733c 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -11260,6 +11260,11 @@ M: Jens Wiklander <jens.wiklander@linaro.org>
> > > S: Maintained
> > > F: drivers/tee/optee/
> > >
> > > +OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
> > > +M: Sumit Garg <sumit.garg@linaro.org>
> > > +S: Maintained
> > > +F: drivers/char/hw_random/optee-rng.c
> > > +
> > > OPA-VNIC DRIVER
> > > M: Dennis Dalessandro <dennis.dalessandro@intel.com>
> > > M: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
> > > diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
> > > index dac895d..25a7d8f 100644
> > > --- a/drivers/char/hw_random/Kconfig
> > > +++ b/drivers/char/hw_random/Kconfig
> > > @@ -424,6 +424,21 @@ config HW_RANDOM_EXYNOS
> > > will be called exynos-trng.
> > >
> > > If unsure, say Y.
> > > +
> > > +config HW_RANDOM_OPTEE
> > > + tristate "OP-TEE based Random Number Generator support"
> > > + depends on OPTEE
> > > + default HW_RANDOM
> > > + help
> > > + This driver provides support for OP-TEE based Random Number
> > > + Generator on ARM SoCs where hardware entropy sources are not
> > > + accessible to normal world (Linux).
> > > +
> > > + To compile this driver as a module, choose M here: the module
> > > + will be called optee-rng.
> > > +
> > > + If unsure, say Y.
> > > +
> > > endif # HW_RANDOM
> > >
> > > config UML_RANDOM
> > > diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
> > > index e35ec3c..7c9ef4a 100644
> > > --- a/drivers/char/hw_random/Makefile
> > > +++ b/drivers/char/hw_random/Makefile
> > > @@ -38,3 +38,4 @@ obj-$(CONFIG_HW_RANDOM_CAVIUM) += cavium-rng.o cavium-rng-vf.o
> > > obj-$(CONFIG_HW_RANDOM_MTK) += mtk-rng.o
> > > obj-$(CONFIG_HW_RANDOM_S390) += s390-trng.o
> > > obj-$(CONFIG_HW_RANDOM_KEYSTONE) += ks-sa-rng.o
> > > +obj-$(CONFIG_HW_RANDOM_OPTEE) += optee-rng.o
> > > diff --git a/drivers/char/hw_random/optee-rng.c b/drivers/char/hw_random/optee-rng.c
> > > new file mode 100644
> > > index 0000000..6ac862a
> > > --- /dev/null
> > > +++ b/drivers/char/hw_random/optee-rng.c
> > > @@ -0,0 +1,272 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (C) 2018-2019 Linaro Ltd.
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/of.h>
> > > +#include <linux/hw_random.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/module.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/tee_drv.h>
> > > +#include <linux/uuid.h>
> > > +
> > > +#define DRIVER_NAME "optee-rng"
> > > +
> > > +#define TEE_ERROR_HEALTH_TEST_FAIL 0x00000001
> > > +
> > > +/*
> > > + * TA_CMD_GET_ENTROPY - Get Entropy from RNG
> > > + *
> > > + * param[0] (inout memref) - Entropy buffer memory reference
> > > + * param[1] unused
> > > + * param[2] unused
> > > + * param[3] unused
> > > + *
> > > + * Result:
> > > + * TEE_SUCCESS - Invoke command success
> > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > > + * TEE_ERROR_NOT_SUPPORTED - Requested entropy size greater than size of pool
> > > + * TEE_ERROR_HEALTH_TEST_FAIL - Continuous health testing failed
> > > + */
> > > +#define TA_CMD_GET_ENTROPY 0x0
> > > +
> > > +/*
> > > + * TA_CMD_GET_RNG_INFO - Get RNG information
> > > + *
> > > + * param[0] (out value) - value.a: RNG data-rate in bytes per second
> > > + * value.b: Quality/Entropy per 1024 bit of data
> > > + * param[1] unused
> > > + * param[2] unused
> > > + * param[3] unused
> > > + *
> > > + * Result:
> > > + * TEE_SUCCESS - Invoke command success
> > > + * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > > + */
> > > +#define TA_CMD_GET_RNG_INFO 0x1
> > > +
> > > +#define MAX_ENTROPY_REQ_SZ (4 * 1024)
> > > +
> > > +static struct tee_context *ctx;
> > > +static struct tee_shm *entropy_shm_pool;
> > > +static u32 ta_rng_data_rate;
> > > +static u32 ta_rng_session_id;
> > > +
> > > +static size_t get_optee_rng_data(void *buf, size_t req_size)
> > > +{
> > > + u32 ret = 0;
> > > + u8 *rng_data = NULL;
> > > + size_t rng_size = 0;
> > > + struct tee_ioctl_invoke_arg inv_arg = {0};
> > > + struct tee_param param[4] = {0};
> > > +
> > > + /* Invoke TA_CMD_GET_ENTROPY function of Trusted App */
> > > + inv_arg.func = TA_CMD_GET_ENTROPY;
> > > + inv_arg.session = ta_rng_session_id;
> > > + inv_arg.num_params = 4;
> > > +
> > > + /* Fill invoke cmd params */
> > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
> > > + param[0].u.memref.shm = entropy_shm_pool;
> > > + param[0].u.memref.size = req_size;
> > > + param[0].u.memref.shm_offs = 0;
> > > +
> > > + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > > + pr_err("TA_CMD_GET_ENTROPY invoke function error: %x\n",
> > > + inv_arg.ret);
> > > + return 0;
> > > + }
> > > +
> > > + rng_data = tee_shm_get_va(entropy_shm_pool, 0);
> > > + if (IS_ERR(rng_data)) {
> > > + pr_err("tee_shm_get_va failed\n");
> > > + return 0;
> > > + }
> > > +
> > > + rng_size = param[0].u.memref.size;
> > > + memcpy(buf, rng_data, rng_size);
> > > +
> > > + return rng_size;
> > > +}
> > > +
> > > +static int optee_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
> > > +{
> > > + u8 *data = buf;
> > > + size_t read = 0, rng_size = 0;
> > > + int timeout = 1;
> > > +
> > > + if (max > MAX_ENTROPY_REQ_SZ)
> > > + max = MAX_ENTROPY_REQ_SZ;
> > > +
> > > + while (read == 0) {
> > > + rng_size = get_optee_rng_data(data, (max - read));
> > > +
> > > + data += rng_size;
> > > + read += rng_size;
> > > +
> > > + if (wait) {
> > > + if (timeout-- == 0)
> > > + return read;
> > > + msleep((1000 * (max - read)) / ta_rng_data_rate);
> > > + } else {
> > > + return read;
> > > + }
> > > + }
> > > +
> > > + return read;
> > > +}
> > > +
> > > +static int optee_rng_init(struct hwrng *rng)
> > > +{
> > > + entropy_shm_pool = tee_shm_alloc(ctx, MAX_ENTROPY_REQ_SZ,
> > > + TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
> > > + if (IS_ERR(entropy_shm_pool)) {
> > > + pr_err("tee_shm_alloc failed\n");
> > > + return PTR_ERR(entropy_shm_pool);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void optee_rng_cleanup(struct hwrng *rng)
> > > +{
> > > + tee_shm_free(entropy_shm_pool);
> > > +}
> > > +
> > > +static struct hwrng optee_rng = {
> > > + .name = DRIVER_NAME,
> > > + .init = optee_rng_init,
> > > + .cleanup = optee_rng_cleanup,
> > > + .read = optee_rng_read,
> > > +};
> > > +
> > > +static int get_optee_rng_info(struct device *dev)
> > > +{
> > > + u32 ret = 0;
> > > + struct tee_ioctl_invoke_arg inv_arg = {0};
> > > + struct tee_param param[4] = {0};
> > > +
> > > + /* Invoke TA_CMD_GET_RNG_INFO function of Trusted App */
> > > + inv_arg.func = TA_CMD_GET_RNG_INFO;
> > > + inv_arg.session = ta_rng_session_id;
> > > + inv_arg.num_params = 4;
> > > +
> > > + /* Fill invoke cmd params */
> > > + param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT;
> > > +
> > > + ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > > + if ((ret < 0) || (inv_arg.ret != 0)) {
> > > + dev_err(dev, "TA_CMD_GET_RNG_INFO invoke func error: %x\n",
> > > + inv_arg.ret);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + ta_rng_data_rate = param[0].u.value.a;
> > > + optee_rng.quality = param[0].u.value.b;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > > +{
> > > + if (ver->impl_id == TEE_IMPL_ID_OPTEE)
> > > + return 1;
> > > + else
> > > + return 0;
> > > +}
> > > +
> > > +static int optee_rng_probe(struct device *dev)
> > > +{
> > > + struct tee_client_device *rng_device = to_tee_client_device(dev);
> > > + int ret = 0, err = -ENODEV;
> > > + struct tee_ioctl_open_session_arg sess_arg = {0};
> > > +
> > > + /* Open context with TEE driver */
> > > + ctx = tee_client_open_context(NULL, optee_ctx_match, NULL, NULL);
> > > + if (IS_ERR(ctx))
> > > + return -ENODEV;
> > > +
> > > + /* Open session with hwrng Trusted App */
> > > + memcpy(sess_arg.uuid, rng_device->id.b, TEE_IOCTL_UUID_LEN);
> > > + sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
> > > + sess_arg.num_params = 0;
> > > +
> > > + ret = tee_client_open_session(ctx, &sess_arg, NULL);
> > > + if ((ret < 0) || (sess_arg.ret != 0)) {
> > > + dev_err(dev, "tee_client_open_session failed, error: %x\n",
> > > + sess_arg.ret);
> > > + err = -EINVAL;
> > > + goto out_ctx;
> > > + }
> > > + ta_rng_session_id = sess_arg.session;
> > > +
> > > + err = get_optee_rng_info(dev);
> > > + if (err)
> > > + goto out_sess;
> > > +
> > > + err = hwrng_register(&optee_rng);
> > > + if (err) {
> > > + dev_err(dev, "hwrng registration failed (%d)\n", err);
> > > + goto out_sess;
> > > + }
> > > +
> > > + return 0;
> > > +
> > > +out_sess:
> > > + tee_client_close_session(ctx, ta_rng_session_id);
> > > +out_ctx:
> > > + tee_client_close_context(ctx);
> > > +
> > > + return err;
> > > +}
> > > +
> > > +static int optee_rng_remove(struct device *dev)
> > > +{
> > > + hwrng_unregister(&optee_rng);
> > > + tee_client_close_session(ctx, ta_rng_session_id);
> > > + tee_client_close_context(ctx);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +const tee_client_device_id optee_rng_id_table[] = {
> > > + UUID_INIT(0xab7a617c, 0xb8e7, 0x4d8f,
> > > + 0x83, 0x01, 0xd0, 0x9b, 0x61, 0x03, 0x6b, 0x64),
> > > + {}
> > > +};
> > > +
> >
> > Could we expose this via MODULE_DEVICE_TABLE() as well? That should
> > allow udev to load the module on demand.
> >
>
> IIUC, here you are referring to addition of "modalias" infrastructure
> for TEE bus. I think this is good feature to have for automatic
> out-of-tree module loading via udev. Shall I create a separate patch
> for this feature addition rather than including it in this patch-set?
>
> Currently I use to put this module entry in /etc/modules for auto-loading.
>

I wouldn't call that auto-loading :-)

But seriously, I think it provides an important rationale for the
patch set as a whole, so I would prefer it if it were included.

\
 
 \ /
  Last update: 2019-01-21 14:03    [W:0.048 / U:28.148 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site