lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
Date
Add documentation for the interconnect and interconnect-names bindings
for the GENI QUP as detailed by bindings/interconnect/interconnect.txt.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
---
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index dab7ca9..44d7e02 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -17,6 +17,12 @@ Required properties if child node exists:
- #address-cells: Must be <1> for Serial Engine Address
- #size-cells: Must be <1> for Serial Engine Address Size
- ranges: Must be present
+- interconnects: phandle to a interconnect provider. Please refer
+ ../interconnect/interconnect.txt for details.
+ Must be 2 paths corresponding to 2 AXI ports.
+- interconnect-names: Port names to differentiate between the
+ 2 interconnect paths defined with interconnect
+ specifier.

Properties for children:

@@ -67,6 +73,10 @@ Example:
#size-cells = <1>;
ranges;

+ interconnects = <&qnoc 11 &qnoc 512>,
+ <&qnoc 0 &qnoc 543>;
+ interconnect-names = "qup-memory", "qup-config";
+
i2c0: i2c@a94000 {
compatible = "qcom,geni-i2c";
reg = <0xa94000 0x4000>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
\
 
 \ /
  Last update: 2019-01-21 12:22    [W:0.071 / U:5.828 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site