lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers: extcon: Add support for ptn5150
Hi Chanwoo Choi,

This is the first time I am sending a driver to LKML. I have a few doubts. Can
you please clarify them when you are free?

1. I have developed and tested this patch on 4.14.89 kernel. When trying to
mainline the driver should I rebase and send the patch on top of current tree(v5.0-rc2)?

2. Is there any specific git on which I should test this driver on? Like below?
https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git

Thanks,
Vijai Kumar K

On Tue, Jan 22, 2019 at 08:05:33AM +0800, kbuild test robot wrote:
> Hi Vijai,
>
> Thank you for the patch! Yet something to improve:
>
> [auto build test ERROR on chanwoo-extcon/extcon-next]
> [also build test ERROR on v5.0-rc2]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
>
> url: https://github.com/0day-ci/linux/commits/Vijai-Kumar-K/drivers-extcon-Add-support-for-ptn5150/20190122-041153
> base: https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git extcon-next
> config: sh-allyesconfig (attached as .config)
> compiler: sh4-linux-gnu-gcc (Debian 8.2.0-11) 8.2.0
> reproduce:
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> # save the attached .config to linux build tree
> GCC_VERSION=8.2.0 make.cross ARCH=sh
>
> All error/warnings (new ones prefixed by >>):
>
> drivers//extcon/extcon-ptn5150.c: In function 'ptn5150_irq_work':
> >> drivers//extcon/extcon-ptn5150.c:93:5: error: implicit declaration of function 'extcon_set_state_sync'; did you mean 'extcon_get_state'? [-Werror=implicit-function-declaration]
> extcon_set_state_sync(info->edev,
> ^~~~~~~~~~~~~~~~~~~~~
> extcon_get_state
> drivers//extcon/extcon-ptn5150.c: In function 'ptn5150_i2c_probe':
> >> drivers//extcon/extcon-ptn5150.c:255:15: error: implicit declaration of function 'devm_extcon_dev_allocate'; did you mean 'extcon_get_state'? [-Werror=implicit-function-declaration]
> info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> extcon_get_state
> >> drivers//extcon/extcon-ptn5150.c:255:13: warning: assignment to 'struct extcon_dev *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
> info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
> ^
> >> drivers//extcon/extcon-ptn5150.c:262:8: error: implicit declaration of function 'devm_extcon_dev_register'; did you mean 'devm_pinctrl_register'? [-Werror=implicit-function-declaration]
> ret = devm_extcon_dev_register(info->dev, info->edev);
> ^~~~~~~~~~~~~~~~~~~~~~~~
> devm_pinctrl_register
> cc1: some warnings being treated as errors
>
> vim +93 drivers//extcon/extcon-ptn5150.c
>
> 51
> 52 static void ptn5150_irq_work(struct work_struct *work)
> 53 {
> 54 struct ptn5150_info *info = container_of(work,
> 55 struct ptn5150_info, irq_work);
> 56 int ret = 0;
> 57 unsigned int reg_data;
> 58 unsigned int port_status;
> 59 unsigned int vbus;
> 60 unsigned int cable_attach;
> 61 unsigned int int_status;
> 62
> 63 if (!info->edev)
> 64 return;
> 65
> 66 mutex_lock(&info->mutex);
> 67
> 68 ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, &reg_data);
> 69 if (ret) {
> 70 dev_err(info->dev,
> 71 "failed to read CC STATUS %d\n", ret);
> 72 mutex_unlock(&info->mutex);
> 73 return;
> 74 }
> 75 /* Clear interrupt. Read would clear the register */
> 76 ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &int_status);
> 77 if (ret) {
> 78 dev_err(info->dev,
> 79 "failed to read INT STATUS %d\n", ret);
> 80 mutex_unlock(&info->mutex);
> 81 return;
> 82 }
> 83
> 84 if (int_status) {
> 85 cable_attach = int_status & PTN5150_REG_INT_CABLE_ATTACH_MASK;
> 86 if (cable_attach) {
> 87 port_status = ((reg_data &
> 88 PTN5150_REG_CC_PORT_ATTACHMENT_MASK) >>
> 89 PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT);
> 90
> 91 switch (port_status) {
> 92 case PTN5150_DFP_ATTACHED:
> > 93 extcon_set_state_sync(info->edev,
> 94 EXTCON_USB_HOST, false);
> 95 gpiod_set_value(info->vbus_gpiod, 0);
> 96 extcon_set_state_sync(info->edev, EXTCON_USB,
> 97 true);
> 98 break;
> 99 case PTN5150_UFP_ATTACHED:
> 100 extcon_set_state_sync(info->edev, EXTCON_USB,
> 101 false);
> 102 vbus = ((reg_data &
> 103 PTN5150_REG_CC_VBUS_DETECTION_MASK) >>
> 104 PTN5150_REG_CC_VBUS_DETECTION_SHIFT);
> 105 if (vbus)
> 106 gpiod_set_value(info->vbus_gpiod, 0);
> 107 else
> 108 gpiod_set_value(info->vbus_gpiod, 1);
> 109
> 110 extcon_set_state_sync(info->edev,
> 111 EXTCON_USB_HOST, true);
> 112 break;
> 113 default:
> 114 dev_err(info->dev,
> 115 "Unknown Port status : %x\n",
> 116 port_status);
> 117 break;
> 118 }
> 119 } else {
> 120 extcon_set_state_sync(info->edev,
> 121 EXTCON_USB_HOST, false);
> 122 extcon_set_state_sync(info->edev,
> 123 EXTCON_USB, false);
> 124 gpiod_set_value(info->vbus_gpiod, 0);
> 125 }
> 126 }
> 127
> 128 /* Clear interrupt. Read would clear the register */
> 129 ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS,
> 130 &int_status);
> 131 if (ret) {
> 132 dev_err(info->dev,
> 133 "failed to read INT REG STATUS %d\n", ret);
> 134 mutex_unlock(&info->mutex);
> 135 return;
> 136 }
> 137
> 138
> 139 mutex_unlock(&info->mutex);
> 140 }
> 141
> 142
> 143 static irqreturn_t ptn5150_irq_handler(int irq, void *data)
> 144 {
> 145 struct ptn5150_info *info = data;
> 146
> 147 schedule_work(&info->irq_work);
> 148
> 149 return IRQ_HANDLED;
> 150 }
> 151
> 152 static int ptn5150_init_dev_type(struct ptn5150_info *info)
> 153 {
> 154 unsigned int reg_data, vendor_id, version_id;
> 155 int ret;
> 156
> 157 ret = regmap_read(info->regmap, PTN5150_REG_DEVICE_ID, &reg_data);
> 158 if (ret) {
> 159 dev_err(info->dev, "failed to read DEVICE_ID %d\n", ret);
> 160 return -EINVAL;
> 161 }
> 162
> 163 vendor_id = ((reg_data & PTN5150_REG_DEVICE_ID_VENDOR_MASK) >>
> 164 PTN5150_REG_DEVICE_ID_VENDOR_SHIFT);
> 165 version_id = ((reg_data & PTN5150_REG_DEVICE_ID_VERSION_MASK) >>
> 166 PTN5150_REG_DEVICE_ID_VERSION_SHIFT);
> 167
> 168 dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
> 169 version_id, vendor_id);
> 170
> 171 /* Clear any existing interrupts */
> 172 ret = regmap_read(info->regmap, PTN5150_REG_INT_STATUS, &reg_data);
> 173 if (ret) {
> 174 dev_err(info->dev,
> 175 "failed to read PTN5150_REG_INT_STATUS %d\n",
> 176 ret);
> 177 return -EINVAL;
> 178 }
> 179
> 180 ret = regmap_read(info->regmap, PTN5150_REG_INT_REG_STATUS, &reg_data);
> 181 if (ret) {
> 182 dev_err(info->dev,
> 183 "failed to read PTN5150_REG_INT_REG_STATUS %d\n", ret);
> 184 return -EINVAL;
> 185 }
> 186
> 187 return 0;
> 188 }
> 189
> 190 static int ptn5150_i2c_probe(struct i2c_client *i2c,
> 191 const struct i2c_device_id *id)
> 192 {
> 193 struct device *dev = &i2c->dev;
> 194 struct device_node *np = i2c->dev.of_node;
> 195 struct ptn5150_info *info;
> 196 int ret;
> 197
> 198 if (!np)
> 199 return -EINVAL;
> 200
> 201 info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
> 202 if (!info)
> 203 return -ENOMEM;
> 204 i2c_set_clientdata(i2c, info);
> 205
> 206 info->dev = &i2c->dev;
> 207 info->i2c = i2c;
> 208 info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
> 209 if (!info->int_gpiod) {
> 210 dev_err(dev, "failed to get INT GPIO\n");
> 211 return -EINVAL;
> 212 }
> 213 info->vbus_gpiod = devm_gpiod_get(&i2c->dev, "vbus", GPIOD_IN);
> 214 if (!info->vbus_gpiod) {
> 215 dev_err(dev, "failed to get VBUS GPIO\n");
> 216 return -EINVAL;
> 217 }
> 218 ret = gpiod_direction_output(info->vbus_gpiod, 0);
> 219 if (ret) {
> 220 dev_err(dev, "failed to set VBUS GPIO direction\n");
> 221 return -EINVAL;
> 222 }
> 223
> 224 mutex_init(&info->mutex);
> 225
> 226 INIT_WORK(&info->irq_work, ptn5150_irq_work);
> 227
> 228 info->regmap = devm_regmap_init_i2c(i2c, &ptn5150_regmap_config);
> 229 if (IS_ERR(info->regmap)) {
> 230 ret = PTR_ERR(info->regmap);
> 231 dev_err(info->dev, "failed to allocate register map: %d\n",
> 232 ret);
> 233 return ret;
> 234 }
> 235
> 236 if (info->int_gpiod) {
> 237 info->irq = gpiod_to_irq(info->int_gpiod);
> 238 if (info->irq < 0) {
> 239 dev_err(dev, "failed to get INTB IRQ\n");
> 240 return info->irq;
> 241 }
> 242
> 243 ret = devm_request_threaded_irq(dev, info->irq, NULL,
> 244 ptn5150_irq_handler,
> 245 IRQF_TRIGGER_FALLING |
> 246 IRQF_ONESHOT,
> 247 i2c->name, info);
> 248 if (ret < 0) {
> 249 dev_err(dev, "failed to request handler for INTB IRQ\n");
> 250 return ret;
> 251 }
> 252 }
> 253
> 254 /* Allocate extcon device */
> > 255 info->edev = devm_extcon_dev_allocate(info->dev, ptn5150_extcon_cable);
> 256 if (IS_ERR(info->edev)) {
> 257 dev_err(info->dev, "failed to allocate memory for extcon\n");
> 258 return -ENOMEM;
> 259 }
> 260
> 261 /* Register extcon device */
> > 262 ret = devm_extcon_dev_register(info->dev, info->edev);
> 263 if (ret) {
> 264 dev_err(info->dev, "failed to register extcon device\n");
> 265 return ret;
> 266 }
> 267
> 268 /* Initialize PTN5150 device and print vendor id and version id */
> 269 ret = ptn5150_init_dev_type(info);
> 270 if (ret)
> 271 return -EINVAL;
> 272
> 273 return 0;
> 274 }
> 275
>
> ---
> 0-DAY kernel test infrastructure Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all Intel Corporation


\
 
 \ /
  Last update: 2019-01-22 05:42    [W:0.124 / U:6.344 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site