lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] Add Oxalis board support
Date
Hello,

This patchset adds Oxalis board support. This board is one of the
96Boards Enterprise Edition platform from EBS-SYSTART GmbH. Below are some
of the key features of this board:

* SoC: NXP Layerscape LS1012A
* RAM: 1GB DDR3L
* PMU: NXP VR5100
* Storage: 64MByte SPI Flash for bootloader and RCW, MicroSD Card, SATA
* Connectivity: 2x Ethernet
* USB: 2x USB3.0

More information about this board can be found in 96Boards product
page: https://www.96boards.org/product/oxalis/

Ethernet and SPI flash are not supported yet!

Thanks,
Mani

Changes in v3:

* Fixed LS1012A and LS1021A bindings
* Added missing devicetree compatibles for LS1021A based boards
* Added Rob's Reviewed-by tag for Vendor prefix patch

Changes in v2:

As per Rob's review:

* Adopted the Oxalis board binding to JSON format.
* Sorted the EBS-SYSTART vendor prefix alphabetically.
* Used the generic node name for audio codec.

Manivannan Sadhasivam (5):
dt-bindings: arm: fsl: Fix bindings for LS1012A and LS1021A based
boards
ARM: dts: Add devicetree compatibles for LS1021A based boards
dt-bindings: vendor-prefixes: Add EBS-SYSTART GmbH Vendor Prefix
dt-bindings: arm: fsl: Add devicetree binding for Oxalis
arm64: dts: freescale: Add devicetree for Oxalis

.../devicetree/bindings/arm/fsl.yaml | 11 ++-
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 1 +
arch/arm/boot/dts/ls1021a-qds.dts | 1 +
arch/arm/boot/dts/ls1021a-twr.dts | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../boot/dts/freescale/fsl-ls1012a-oxalis.dts | 96 +++++++++++++++++++
7 files changed, 111 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dts

--
2.17.1

\
 
 \ /
  Last update: 2019-01-22 05:23    [W:0.088 / U:7.728 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site