[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v3 0/3] mach-omap2: handle autoidle denial
* Andreas Kemnade <> [190116 14:04]:
> On the gta04 with a dm3730 omap_hdq does not work properly when the
> device enters lower power states. Idling uart1 and 2 is enough
> to show up that problem, if there are no other things enabled.
> Further research reveals that hdq iclk must not be turned off during
> transfers, also according to the TRM. That fact is also correctly described
> in the flags but the code to handle that is incomplete.
> To handle multiple users of a single ick, autoidle is disabled
> when a user of that ick requires that (has the OCPIF_SWSUP_IDLE))
> Changes v3:
> - replace CLK_IS_BASIC
> Changes v2:
> - uses spinlocks instead of mutexes
> - invert counter logic
> - check whether clock type is basic

For this series it's best to merge it all via the
clock tree along with the related clock patches:

Acked-by: Tony Lindgren <>

 \ /
  Last update: 2019-01-21 20:58    [W:0.081 / U:1.244 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site