lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH lora-next 1/4] dt-bindings: lora: sx130x: add basic documentation
On Tue, Jan 08, 2019 at 05:41:29PM +0900, Ben Whitten wrote:
> Add basic documentation in YAML format for the sx130x series concentrators
> from Semtech.
> Required is; the location on the SPI bus, the reset gpio and the node for
> downstream IQ radios, typically sx125x.
>
> Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
> ---
> .../bindings/lora/semtech,sx130x.yaml | 87 +++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/lora/semtech,sx130x.yaml

A schema binding. Yay!

>
> diff --git a/Documentation/devicetree/bindings/lora/semtech,sx130x.yaml b/Documentation/devicetree/bindings/lora/semtech,sx130x.yaml
> new file mode 100644
> index 000000000000..ad263bc4e60d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/lora/semtech,sx130x.yaml
> @@ -0,0 +1,87 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/lora/semtech,sx130x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Semtech LoRa concentrator
> +
> +maintainers:
> + - Andreas Färber <afaerber@suse.de>
> + - Ben Whitten <ben.whitten@gmail.com>
> +
> +description: |
> + Semtech LoRa concentrator sx130x digital baseband chip is capable of
> + demodulating LoRa signals on 8 channels simultaneously.
> +
> + It is typically paired with two sx125x IQ radios controlled over an
> + SPI directly from the concentrator.
> +
> + The concentrator itself it controlled over SPI.

s/it/is/

> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - semtech,sx1301
> + - semtech,sx1308
> +
> + reg:
> + maxItems: 1
> + description: The chip select on the SPI bus.
> +
> + reset-gpios:
> + maxItems: 1
> + description: A connection of the reset gpio line.
> +
> + spi-max-frequency:
> + maximum: 10000000
> + default: 8000000
> + description: The frequency of the SPI communication to the concentrator,
> + in Hz. Maximum SPI frequency is 10MHz although 8MHz is typically used
> + on a number of cards.
> +
> + radio-spi:

child nodes should have 'type: object'

> + description: The concentrator has two radios connected which are contained
> + within the following node.
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0

You need the grandchildren here too to define 'reg' should be 0-8.
You'll need to use 'patternProperties' since there's a unit-address.

You could maybe get rid of the radio-spi node. You don't need it unless
you wanted to add other types of child nodes.

> +
> + required:
> + - '#address-cells'
> + - '#size-cells'
> +
> +required:
> + - compatible
> + - reg
> + - reset-gpios
> + - radio-spi
> +
> +examples:
> + - |
> + concentrator0: lora@0 {
> + compatible = "semtech,sx1301";
> + reg = <0>;
> + reset-gpios = <&pioB 27 GPIO_ACTIVE_HIGH>;
> + spi-max-frequency = <8000000>;
> +
> + radio-spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + radio0: lora@0 {
> + compatible = "semtech,sx1257";
> + reg = <0>;
> + };
> +
> + radio1: lora@1 {
> + compatible = "semtech,sx1257";
> + reg = <1>;
> + };
> + };
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-01-21 20:15    [W:0.097 / U:0.256 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site