[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/1] Thermal throttling for SDM845
Only one patch left in this series. This patch can be applied independently
but needs [1] and [2] merged to have throttling work out of the box.

Changes since v2:
- Split up the series into auto-register series for cpufreq[1] and
miscellaneous patches[2][3]. [1] and [2] are needed for this patch to
- Merged the two DT patches into one. We end up with 2 passive and 1
critical trip point.
- Remove unncessary cooling map for critical trip point, we're shutting down at
that trip, duh!


Amit Kucheria (1):
arm64: dts: sdm845: wireup the thermal trip points to cpufreq

arch/arm64/boot/dts/qcom/sdm845.dtsi | 225 +++++++++++++++++++++++++--
1 file changed, 209 insertions(+), 16 deletions(-)


 \ /
  Last update: 2019-01-21 19:09    [W:0.057 / U:5.352 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site