lkml.org 
[lkml]   [2019]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: n900: fix mmc1 card detect gpio polarity
Date
Wrong polarity of card detect GPIO pin leads to the system not
booting from external mmc, if the back cover of N900 is closed.
When the cover is open the system boots fine.

This wasn't noticed before, because of a bug, which was fixed
by commit e63201f19 (mmc: omap_hsmmc: Delete platform data GPIO
CD and WP).

Kernels up to 4.19 ignored the card detect GPIO from DT.
---
arch/arm/boot/dts/omap3-n900.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 182a53991c90..826920e6b878 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -814,7 +814,7 @@
/* For debugging, it is often good idea to remove this GPIO.
It means you can remove back cover (to reboot by removing
battery) and still use the MMC card. */
- cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+ cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
};

/* most boards use vaux3, only some old versions use vmmc2 instead */
--
2.11.0
\
 
 \ /
  Last update: 2019-01-21 08:43    [W:0.049 / U:67.240 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site