Messages in this thread Patch in this message | | | From | Paul Cercueil <> | Subject | [PATCH 6/8] mtd: rawnand: jz4780-bch: Don't set clock rate in driver | Date | Thu, 17 Jan 2019 22:06:32 -0300 |
| |
This should be done in devicetree. Besides, it prevents us from supporting other SoCs which don't use the same clock frequency for the BCH hardware.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/mtd/nand/raw/jz4780_bch.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/jz4780_bch.c index 7e4e5e627603..161d3821e1c4 100644 --- a/drivers/mtd/nand/raw/jz4780_bch.c +++ b/drivers/mtd/nand/raw/jz4780_bch.c @@ -57,8 +57,6 @@ #define BCH_BHINT_UNCOR BIT(1) #define BCH_BHINT_ERR BIT(0) -#define BCH_CLK_RATE (200 * 1000 * 1000) - /* Timeout for BCH calculation/correction. */ #define BCH_TIMEOUT_US 100000 @@ -348,8 +346,6 @@ static int jz4780_bch_probe(struct platform_device *pdev) return PTR_ERR(bch->clk); } - clk_set_rate(bch->clk, BCH_CLK_RATE); - mutex_init(&bch->lock); bch->dev = dev; -- 2.11.0
| |